Identificador: 1815
Abierta
ID de articulo : # 1815 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-AF19N
Is designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw table where the feeder is mounted.
- Consistent feeding for bandsaws and resaws
- Pneumatic activation of feeding unit, no foot pedal required
- 10 feed speeds for optimum control
- Line bar roller fence is easily adjusted by rack and pinion handle
- Comes with (2) adjustable steel serrated rollers
- Can be mounted to almost any bandsaw/resaw (recommended for 24” and up)
KEY ADVANTAGES
- Heavy duty construction
- Adjustable feed wheels to accommodate for the height of your material
- Roller fence aids in feeding of material
|
|
INCH |
METRIC |
|
Feed Speeds (10) |
4/8.5/8.5/14/17/25/28/30/50/60 FPM |
1.5/2.5/2.5/4/5/7.5/8/9/15/18 M/min |
|
Roller size |
Φ6-7/8”x 1-9/16″ x 2 pcs / Cast Steel |
Φ175 x 40 mm x 2 pcs |
|
Motor |
1/2 HP (0.375 KW), 3 phase; Forward |
1/2 HP |
|
Maximum roller stroke |
8” |
200mm |
|
Fence dimensions |
16” x 7 7/8” |
400 x 200mm |
|
Max. Roller-Blade Clearance |
8 1/4” |
210mm |
|
Net Weight |
79 Kg |
176 Lbs |
|
Gross Weight |
97 Kg |
209 Lbs |
|
Packing Size |
1220 x 480 x 470mm |
48″ x 18-7/8″ x 18-1/2″ |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 3/16''
DOBLADORA DE METAL 5' X 3/16'' PARTE: 2GM-05316EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX370MIs designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual function end trim and corner rounding unitVersatile edgebander capab...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...