Identificador: 1805
Abierta
ID de articulo : # 1805 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2CK-PCS30
Is the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful motor and adjustable cutting stroke ensure it can effortlessly cut through a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, and a security bolt on the saw access door. Available in either left-hand or right-hand operation depending on your ideal production flow.
- Large cutting capacity from 2”x27” up to 10”x10”
- Adjustable cutting stroke to ensure optimum cutting speed and cut quality
- Reliable performance day in and day out
- Added safety features
KEY ADVANTAGES
- Available in Right-Hand & Left-Hand configuration
- Cut off capacity (thickness x width): 2″x27″, 4″x24″, 6″x21″, 8”x16”, 10”x10”
- Powerful 15HP main motor (20HP optional)
- Pneumatic foot pedal operation with adjustable cutting speed from the front of the machine (Optional dual push bottom control)
- Adjustable cutting cycle from 10~ 15 strokes per minute
- Cast iron table surface is precision ground assuring high cutting accuracy.
- Material clamp is easily adjusted for workpiece thickness variation.
- CSA/UL magnetic switch
|
Cutting capacity (thickness x width) |
2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10” |
|
Cycle speed |
10~15 strokes/min |
|
Cycle operation |
Pneumatic |
|
Saw blade size |
30” |
|
Saw arbor diameter |
2″ |
|
Saw blade speed |
1600 RPM |
|
Dust exhaust diameter |
Ø5″ x 3 |
|
Motor |
15 HP (20HP optional) |
|
Table size |
50.2″ x 31.9″ |
|
Net weight |
1430 lbs |
|
Gross weight |
1694 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - VERTICAL - 25 X 35 PULGADAS
PARTE: 2TA-WG-2535V - ASTILLADORA - VERTICAL - 25 X 35 PULGADASFeatures:A specially designed with the push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allow...
AMXmachinery1
LIJADORA DE BANDA ANCHA CON CEPILLO
PARTE: 2CK-PRODUCTION SERIESThe spiral insert cutterhead produces a fine finish while requiring less horsepower than traditional straight knives. Additionally, are produced with an extra heavy-duty frame, industrial cast-iron pressure shoes, and cast-iron sanding head assemblies. These features allow to excel in high production environments and in demanding wide belt sanding applications. The PRN series are available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. T...
AMXmachinery1
SIERRA DE BANCO - 14 PULGADAS
PARTE: 2CK-TA12Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado arbors...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...