Identificador: 1803
Abierta
ID de articulo : # 1803 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-PCS18M
Is the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful 10HP motor and adjustable cutting stroke ensure it can effortlessly cut though a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, security bolt on the saw access door, blade misting system, and solid chrome table. Available in either left hand or right hand operation depending on your ideal production flow.
- Large cutting capacity of 2”x12” up to 4”x10”
- Adjustable cutting stroke to ensure optimum cutting speed and cut quality
- Reliable performance day in and day out
- Added safety features
KEY FEATURES
- Available in Right Hand & Left Hand configuration
- Cut off capacity (thickness x width): 2″ x 12″, 3″ x 11″, 4″ x 10″
- Powerful 10HP main motor
- Pneumatic foot pedal operation with adjustable cutting speed from the front of the machine (Optional dual push bottom control)
- Fast cutting cycle with up to 45 strokes per minute
- Non-ferrous cutting blade
- Air over oil for precise speed control
- Blade misting system that applies a thin film of lubricant for preventing friction build up, and maximizes saw productivity and blade life
- Corrosion resistant solid chrome table
- Zero cut line with T-clamp that increases precision cuts and reduces possibility of tear out
- Material clamp is easily adjusted for workpiece thickness variation.
- CSA/UL magnetic switch
|
Cutting capacity (thickness x width) |
2″ x 12″, 3″ x 11″, 4″ x 10″ |
|
Cycle speed |
45 strokes/min |
|
Cycle operation |
Air |
|
Saw blade size (optional) |
18″ |
|
Saw arbor diameter |
1″ |
|
Saw blade speed |
3600 RPM |
|
Dust exhaust diameter |
Ø4″ |
|
Air consumption |
9.8 CFM |
|
Motor |
10 HP |
|
Table size |
26” x 27 ½” |
|
Net weight |
770 lbs. |
|
Gross weight |
902 lbs. |
|
Machine dimensions (LxWxH) |
42” x 27” x 48” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
PARTE: 2TA-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADASFeatures:A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows ag...
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...
AMXmachinery1
SIERRA ESCUADRADORA - 10 PIES
PARTE: 2CK-D405AIs the ideal sliding panel saw for high accuracy cutting of sheet materials to produce kitchen cabinetry, furniture, millwork operations, and more. This is our most industrial saw with manual setting rip fence. The 10’ sliding table is made from a precision aluminum extrusion and runs on precision linear guide rails. It has motorized rise/fall and tilt of the blades.Motorized blade height & tilt adjustment with a digital angle readoutPrecision sliding table runs on hardened...
AMXmachinery1
ENCHAPADORA DE CANTOS - MANUAL PORTABLE
PARTE: 2CK-MX550AUIs a versatile portable edgebanding solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). The full kit includes the portable edgebander, power trimmer, workpiece ...