Identificador: 1795
Abierta
ID de articulo : # 1795 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-MRS155
FEATURES
- Extra Robust 100 HP motor
- Great Cutting Thickness of 155mm (6.1″)
- Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumber
- MRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set up
- Precision chain and rails (dip chain) system facilitates accurate cutting operations
- Link Chain Feed made of special cast iron, high-grade steel connecting pins are heat-treated and precision ground
- 3 anti-kickback fingers. 2 top and 1 bottom row
- Digitally controlled lubricator for feed chain ensures a permanent oil film between the chain and the guide rails. If there is insufficient oil in the tank, the warning lamp lights up and the feed chain stops running automatically
- Electrical Amperage Display protects overload of the saw motor by slowing the link chain down automatically
|
Max. cutting thickness |
155mm |
|
Max. cutting width |
350mm |
|
Distance of fixed inside blade to column |
380mm |
|
Min. working length |
700mm |
|
Max. sawblade diameter |
450mm (18″) |
|
Min. sawblade diameter |
355mm (14″) |
|
Sawblade bore |
70mm |
|
Saw arbor diameter |
55mm |
|
Saw
arbor speed |
2500 rpm |
|
Saw
arbor speed |
3000 rpm |
|
Saw arbor motor |
75 HP |
|
Feed motor |
3 HP |
|
Variable feed speed |
2.5-24 m/min |
|
Powered raise and lower of roller group |
1 HP |
|
Dust hood diameter |
200mm |
|
Table height (pass line) |
745mm |
|
Table area (L x W) |
1840 x 790mm |
|
Overal
dimensions |
23040x1720x1600mm |
|
Net weight |
2700 kgs |
|
Gross weight |
3000 kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P20HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
COLECTOR DE ASERRIN - 3 HP
PARTE: 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so it can be moved around ...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
AMXmachinery1
AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTA
PARTE: 2TA-TG-225B - AFILADORA PARA SIERRA DE VAIVEN - BANDA RECTAFEATURESA Peripheral Equipment for Frame SawDesigned to Maximize Blade Service Life While Minimizing Blade Consumption.The wet grinding feature assures extremely fine finish on teeth surfaces and greatly extends cutting period of saw blade.Very precise grinding module.Exact guiding of saw blades guarantees a minimum satellite loss.Grinding amount adjustment is accurately indicated by dial gauges.Variable grinding speed is con...