Identificador: 1762
Abierta
ID de articulo : # 1762 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-PS43DA
Heavy duty construction with upgraded horsepower for production use
- Dual sanding heads for increased productivity
- First sanding head is steel with superior calibration results while the second head is a combination unit with adjustable platen for calibration and finish sanding capabilities
- Accurate digital thickness control to 0.001” (0.026mm) resolution
- Micro sanding drum height adjustments with dial indicators
- Caliper thickness setting unit for fast setup to your workpiece
KEY ADVANTAGES
- Heavy duty welded steel frame with cast iron sanding head assemblies for vibration free sanding.
- Dual rubber covered pressure rollers on infeed and outfeed for consistent material hold down.
- High quality rubber conveyor with automatic pneumatic belt tracking
- Extended infeed bed with two table rollers
- Table is adjusted using four heavy duty jack screws driven by robust chain system.
- Automatic caliper thickness setting
- Electronic sanding belt tracking
- Pneumatic belt tensioning & quick release outboard support for fast belt changes
- Automatic disc brakes for the sanding heads allows for fast belt changeover
- Safety switches on all access doors.
- High quality Schneider electrical controls and Comozzi pneumatic valves
|
|
Inch |
Metric |
|
Abrasive belt size |
43” x 75” |
1092 x 1900 mm |
|
Main motor first head |
25 HP |
|
|
Main motor second head |
20 HP |
|
|
Feed motor |
3HP |
|
|
Table rise/fall motor |
½ HP |
|
|
Maximum sanding width |
42” |
1066 mm |
|
Minimum part length |
17.5” |
440 mm |
|
Minimum material thickness |
1/8” |
3 mm |
|
Maximum material thickness |
5.9” |
150 mm |
|
Feed speed: variable |
12 to 46 FPM |
3.6 to 14 m/min |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
-500x500.png)
AMXmachinery1
TORNO 20'' x 80''
TORNO 20'' x 80'' PARTE: 2GM-GML-2080Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.ISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore ...
AMXmachinery1
PARTE: 12531 - ASERRADERO ESTACIONARIO - BAKER - 3674D
PARTE:
12531 - ASERRADERO ESTACIONARIO - BAKER - 3674D
USADO - MUY BIENAS
CONDICIONESModelo: 3674DMfg. 2022551 horas de uso - 09/18/23Se usa 2 a 3 dias a la semanaUnico duenoPortable
Log deck
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...