Identificador: 172
Abierta
ID de articulo : # 172 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER JOINT
Features:
It performs cut off, burrs trimming, and moulding functions.
Two 4" D x 5" L max. tenon cutters, cope spindle accepts general shaper cutter. Suited for cutting tenons, finger joints for window or doorframe and general joint-tenon.
Hand, manual operated clamping and feeding of stock.
First the trim saw to cut off the end of stock evenly.
Then two moulding, tenon spindles are mounted at the rear of saw enable machine performs edge moulding.
Since each head is adjusted independently, a wide variety of tenon can be cut.
At the end the cope spindle provides 6000 RPM cutting which allows it to feature a spindle sharper function.
All operations can be accomplished in a single pass of feeding, high efficiency is assured.
Powerful industrial motor for maximun cutting capacity.
Precision sealed long-life bearing.
Heavy cast iron frames and table for durability usage.
|
SPECIFICATIONS |
|
2TA-SET-60 |
|
CAPACITY |
Max. Length of Cut |
~ |
|
Min. Length of Cut |
5" |
|
|
Max. Width of Cut |
17" |
|
|
Max. Clamping Thickness |
4" |
|
|
TRIM SAW |
Saw Blade Dia. |
8" ~ 10"x 1 |
|
Saw Arbor Dia. |
1" |
|
|
Saw Blade Speed |
4000 RPM |
|
|
Saw Head Tilt |
NO |
|
|
TENONER HEAD |
Spindle Shaft |
1" Dia. Taper x 4" L x 2 |
|
Spindle Speed |
4000 RPM |
|
|
COPE HEAD |
Spindle Speed |
3600 RPM |
|
Spindle Shaft |
1" Dia. x 4" L |
|
|
Spindle Tilt |
NO |
|
|
TRAVERSE |
Saw Longitudinal Travel |
3" |
|
Saw Vertical Travel |
3" |
|
|
Carriage Cross Travel |
20" |
|
|
MOTOR |
Saw & Tenoner Head |
3 HP x 1 |
|
Cope Head |
3 HP x 1 |
|
|
WEIGHT |
N.W. |
990 LBS |
|
|
G.W. |
1200 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...
AMXmachinery
PARTE: 2EX-DC-2100 - COLECTOR DE ASERRIN CON CICLON
PARTE: 2EX-DC-203C – COLECTOR DE ASERRIN CON
CICLON – MOTOR 3 HP – 1785 CFMPARTE: 2EX-DC-250 – COLECTOR
DE ASERRIN CON CICLON – MOTOR 5 HP – 2975 CFMPARTE: 2EX-DC-275 – COLECTOR DE ASERRIN CON CICLON – MOTOR 7.5 HP – 4850 CFMPARTE: 2EX-DC-2100 – COLECTOR DE ASERRIN CON CICLON – MOTOR 10 HP – 6400 CFMNuevo con garantía1 micron filter bagsDrums not includedLow noise operationstandard 1 micron filterheavy duty dynamically balanced
impellersheavy gauge steel con...
AMXmachinery
MESA ESCUADRADORA DESLIZABLE
PARTE # SIL-DC-ST0408 - MESA ESCUADRADORA DESLIZABLE DE 4 PIES X 8 PIESCapacidad de corte longitudinal: 50” (1270 mm)Accesorio para Sierras DC-MBS250 Y DC-MBS300
AMXmachinery
MOLDURADORA - MACHIMBRADORA - 4 CABEZALES
PARTE: 1N-0800- MOLDURADORA/MACHIMBRADORA - 4 CABEZALES- NUEVA CON GARANTIA- INCLUYE LOS 4 CORTADORES - 1 ARRIBA, 1 ABAJO Y 2 LATERALES- CADA CORTADOR INCLUIDO TIENE 4 ALAS- ANCHO DE LA MESA: 20"- LARGO DE LA MESA: 63"- ANCHO MINIMO: 2"- ANCHO MAXIMO: 6", 7" y 8" A ESCOGER- GRUESO MINIMO: 1/2"- GRUESO MAXIMO: 2"- LARGO MINIMO: 50 CM- 1 CABEZAL HORIZONTAL PARA CEPILLADO- 2 CABEZALES VERTICALES PARA LOS CANTOS- 1 CABEZAL HORIZONTAL DE SALIDA- FLECHAS DE LOS CORTADORES LATERALES SON DE 1" DIAMET...