Identificador: 1706
Abierta
ID de articulo : # 1706 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-SR750
Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”. Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.
- Precision Constructed Spindle Assembly: The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.
- 3-Position Depth Stops: A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently
- Spindle Travel: Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.
- Lubrication: Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.
- Rigid Table: The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.
- Drive Belt: Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.
- Collets Included – Double taper type: 1/4″ 3/8″, 1/2″, 5/8″. Metric sizes available as an option: 6, 9, 12mm.
- Guide Pins Included: 1/4″, 3/8″, 1/2″.
- 7.5HP Spindle Motor with magnetic switch.
- Dust cleaning air gun
- Brush ring shroud
- Fence for straight routing
- Dust Hood: 3″ diameter outlet
- Grease: One bottle spread, recommended grade SUN-742EP.
|
Chuck to table top maximum |
11″ (280mm) |
|
Throat clearance |
29-1/2″ (750mm) |
|
Spindle speeds (2 speeds) |
10,000 / 20,000 RPM |
|
Spindle travel |
3-3/4″ (95mm) |
|
Depth stops |
3 Position turret stops, adjustable |
|
Table travel |
7-1/2″ (190mm) |
|
Table surface area |
36″ x 40″ (915 x 1016mm) |
|
Table tilt |
Front downward to 45degrees |
|
Micrometric table raise |
3/64″(1mm) per revolution of handwheel |
|
Collet sizes |
1/4″ 3/8″ 1/2″ 5/8″ |
|
Spindle drive motor |
7.5HP |
|
Belt size |
35 x 2330mm |
|
Net weight |
720kgs (1590 lbs) |
|
Gross weight |
900kgs (1990 lbs) |
|
Packing dimensions |
66″ x 44″ x 72″ (L x W x H) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
COLECTOR DE POLVOS - 15 HP - 2CK-DBS15Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood waste in ...
AMXmachinery1
TORNO 32 x 120''
TORNO 32 x 120'' PARTE: 2GM-GML-32120Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is supported a...
AMXmachinery1
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
AMXmachinery1
SIERRA MULTIPLE - 2 SIERRAS MOVIBLES
PARTE: 2CK-MRS340MThe motorized moving blade system is designed to provide you with maximum flexibility in your ripping operations to achieve the maximum yield from your material. The touch screen control allows the operator to pre-set the blades position(s) or jog the blades to achieve the desired ripping result. Each moving blade is controlled by a servo motor and is adjusted using a ball screw and linear guideway for the highest accuracy. The blade position is indicated with a laser...