Identificador: 170
Abierta
ID de articulo : # 170 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERY
Nueva con garantia
- Built with two working tables for high efficiency operations.
- Table longitudinal traverse is pneumatic operated for smooth cutting.
- Tenon’s width is easily adjustable by hand wheel.
- Convenient tenon depth adjustment from outside without removing covers.
- Table can be tilted to 20 degrees at each side for angular tenon.
- Cutter moving speed is infinitely adjustable to achive the best results.
- Pneumatic hold down clamps and pneumatic cutting movement for smooth finish.
- Fully automatic tenon produce cycles.
- Automatic lubrication system.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2NV-KDK-18N - SECANTE DE MADERA - CAPACIDAD 20,000 PIES TABLA
PARTE: 2NV-KDK-18N - SECANTE DE MADERA - CAPACIDAD 20,000 PIES TABLAUna estufa propia puede reducir los costos de almacenamiento, producción, transporte y dar valor agregado a su producción.Contactenos para una cotizacion detallada.
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
SIERRA RADIAL AUTOMATICA
PARTE: 2EV-0710 – SIERRA RADIAL - AUTO - EVANS 0710Power feed with
variable speed control
35 1/2 "
working height. Adjustable leveling feet.
NEW: Additional
guarding on both sides of the blade and around the controlsPreset 90°, 45°, and 22-1/2° Cut Guides16” Saw Blade with a 1” ArborPneumatic Saw GuardSwing Out Supports for LongerLengths4” Dust PortVariable Speed: 0-50 FPMMax Cut Stroke: 50”Work Surface: 60” X 96”Drive Motor: 3 HPElectrical: 230 V, 3 PH, 60 HzAir Requir...
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...