Identificador: 1698
Abierta
ID de articulo : # 1698 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-DT-1128A
|
Range of cutter diameter |
1” to 6” (changeable) |
|
Table diameter |
18” |
|
Table speed |
1.5 ~ 4.0 RPM (4 speeds) |
|
Spindle diameter |
30 mm |
|
Spindle speed |
9000 RPM |
|
Cutter size |
100 mm |
|
Spindle height |
4” |
|
Follower roller diameter |
100 mm x 1 |
|
Table drive motor |
1 hp |
|
Spindle motor |
5 HP x 1 |
|
Working speed |
5~6 times/minutes |
|
Net weight |
1,000 kgs |
|
Gross weight |
1,100 kgs |
|
Packing size |
230” x 160” x 210 cm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CANTEADORA PORTATIL
CANTEADORA PORTATIL PARTE: 2CK-MX550AUIs a versatile portable edgebanding solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). The full...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
-500x500.png)
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 7.5HP
SIERRA CINTA 24" - 2 EN 1- 7.5HP - 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the HB600A unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 7.5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple desig...
AMXmachinery1
PRO-LINE CNC
PRO-LINE CNCA machine, that is particularly well suited for the door and window industry.• Up to 2 CNC processing units – mounted at the top• CNC units – right side and left side• Possibility of groove milling at out feed• Horizontal magazine – also functions as a bufferExtra• Waste Conveyer