Identificador: 1695
Abierta
ID de articulo : # 1695 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-SS512CB
- 1 ¼” interchangeable spindle is standard (other sizes available)
- Large cast-iron table is ground and polished for maximum stability and durability
- Powerful 7.5 HP motor for even the most demanding profiling work
- Five spindle speeds can be easily adjusted to suit your tool diameter
- Electronic spindle brake for added safety and facilitates with fast changeover
- Precision fence assembly with micro infeed and outfeed fence adjustment
- Finger style fence allows fence to be adjusted around the cutter for added safety and workpiece stability
- Cast iron ground & polished table with insert rings & t-slot for mitre / tenoning jig
- Precision ground and electronically balanced spindle
- V-belt drive with (5) spindle speeds is easily accessed from the front of the machine (3/4/6/8/1000 RPM)
- Electric spindle brake for added safety
- Spindle lock – with limit switch safety, machine will not start with lock engaged
- Micro spindle height adjustment with dial indicator for precise height adjustment
- 1 ¼” Interchangeable cutter spindle is standard
- Forward/reverse spindle rotation
- Adjustable “finger” type fence
- Independent micro-fence adjustment on both sides
- Plug to accept Cantek Power Feeder and table is pre-drilled for mounding feeder base
Includes the following standard equipment:
- 1 ¼” spindle
- (1) 5” dust chute on guard & (1) 4” dust chute in the table
- Safety guard
- Mitre tenoning jig
|
Table size |
31 1/2 “ x 39.4” |
|
Spindle speeds (5) |
3000/4000/6000/8000/10000 RPM |
|
Spindle taper |
5 MT |
|
Spindle diameter |
1 ¼” |
|
Motor |
7.5 HP |
|
Largest diameter of cutter: |
|
|
Above table |
8 ¼” |
|
Below table |
13 ¼” |
|
Fence size |
6” x 43” |
|
Vertical spindle stroke |
7” |
|
Useable length of spindle |
5 ½” long |
|
Dust port |
(1)5” on guard, (1) 4” in table |
|
Total HP |
7.5 HP |
|
Net weight |
1034 lbs. |
|
Machine dimensions |
48.4” x 39.4” x 52 ¾” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CORTADORA 10' X 10 GA
CORTADORA 10' X 10 GA PARTE:2GM-HS-1010EThis powerful and precise machine features a 36" German SIKO Front Operated Power Back Gauge, quick change blade gap adjustment, and a full-length viewable finger guard for operator safety. With its advanced features and reliable performance, the HS-1010E is the perfect choice for achieving accurate and efficient metal cutting results.ISO 9001 certifiedTaiwan machinesHS-1010E comes with 36” German SIKO Front...
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
-500x500.jpg)
AMXmachinery1
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
AMXmachinery1
DOBLADORA HIDRAULICA ROTATORIA
DOBLADORA HIDRAULICA ROTATORIA PARTE: 2GM-DB-60ATaiwan MachineISO 9001 certifiedNC-control for bending angle adjustmentLED degree indicator with automatic stop programming, to get as true reading of bending degree.Up to 50 jobs memory; each job program contains 9 stepsCounter roller holder comes standard with quick adjustmentThis easy to use hydraulic tube draw bender has an incredible capacity of 2” tube with .12” wall thickness and 1-1/2” schedule# 4...