Identificador: 1691
Abierta
ID de articulo : # 1691 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-CD-305 - CASETA DE PINTURA - CONTINUA PARA MOLDURAS
Allows the automatic in line spraying of lacquers & stains on mouldings, picture frames, door, window & furniture components up to 305mm wide. The wide spraying booth contains 6 spray guns that are automatically timed by photocells to minimize material usage and waste. A PLC control system, equipped with LCD display, checks all the machine functions and setup.
- 6 High Quality, Gold River Spray Guns which are controlled by individual air pressure regulators
- PLC control for easy operation and set up
- Fast spraying processing for profile strips & edges
- The spray guns are controlled by photocell sensor for auto spray time and amount of spray – saves material
- Easy cleaning of guns with independent valve systems
- Internal components manufactured out of stainless steel
- Powerful collection fan for air purification through filter
- Totally enclosed Cabinet to minimize pollution with forced air unit
- Paint recycling unit included for collecting and reusing overspray.
- Variable feed speed control from 33~100 FPM (higher feed speed available upon request)
- Convenient rack & pinion lateral adjustment of the spray guns
- Paper filters are used on both sides of roller conveyer which is in the spray chamber & a fiber glass filter is used on the back side of spray chamber to ensure a clean machine & clean air
- Machine can be used for water based or UV coating material (solvent based product)
|
Max. Width |
12″ (305mm) |
|
Max. Thickness |
3.54″ (90mm) |
|
Max. Length |
Infinite |
|
Min. Length |
21.65″ (550mm) |
|
Feed Speed |
33~100+ FPM (10M~30M/min) |
|
Feed Motor |
1 HP |
|
Exhaust Fan Motor |
5 HP |
|
Electrics |
230/460 or 575/3/60 to CSA/UL Standards (specify) |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DOBLADORA DE METAL
DOBLADORA DE METAL Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
Model
18
24
30
Maximum capacity,
mild steel
20 ga / 1,0
mm...
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
PARTE: 2CK- LMC-418S - MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
SPECIFICATIONS
Thickness of material
¼” to 5”
Width of material
.6” to 8”
Min lenght of material
8” (butt fed)
Feed speeds to
20 – 85 FPM (6 – 25 MPM)
Axial Adjust (side heads)
.8” (20mm)
Axial Adjust
(top/b...
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...