Identificador: 1674
Abierta
ID de articulo : # 1674 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2CK-FR-300 - SIERRA SE VAIVEN
FEED ROLLS & PRESSURE ROLLS
- Bottom Rolls – 7 pieces in Front Section & 5 pieces in Rear Section
- Top Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensor
- Top Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
|
Motor
|
20 HP +1/2 HP + 5kW(Servo) + 2HP Blower |
|
Max. Working Thickness
|
310 mm |
|
Min. Working Thickness
|
80 mm |
|
Max. Working Length
|
200 mm |
|
Min. Working Length
|
400 mm |
|
Feed Speed
|
0.1-2.0 m/min |
|
Main Shaft Speed
|
450 RPM, stroke distance 260 mm |
|
Saw blade Size
|
655 x 45 x 0.8 mm, Kerf: 1.2 mm, Pitch: 15 or 17, Stellite or TCT |
|
Max Saw Blades
|
30 pieces |
|
Finished Tolerance Value
|
±0.15 mm |
|
Min Precision Thickness
|
3 mm |
|
Dust Pipe
|
5“ x 4 pieces |
|
Machine Dimensions
|
L3200 x W1050 x H2050 mm |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
PARTE: 2GM-EFM-1014CNC - DOBLADORA DE METAL - 10' X 14 GA - CNC
PARTE: 2GM-EFM-1014CNC - DOBLADORA DE METAL - 10' X 14 GA - CNC CNC folding machine with an Italian ESA CNC control. 11" touch screen straight brake. 2000 jobs memory capacity.ISO 9001 certifiedDesigned in US and Taiwan quality MachineMeet OSHA and CE safety standardESA CNC control, made in Italy16” large Digital glass touch screenMax. 99 bends per programUpto 2000 Programs StorageProfiles library with graphicsProgrammable Radius BendProgramma...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush trimming, PVC scrapi...