Identificador: 1647
Abierta
ID de articulo : # 2238 se ha agregado a su lista de deseos.
ID de articulo : # 1647 se ha agregado a su lista de deseos.
Descripción
PART: 3CH-83A-160-E - BRIQUETTER - METAL CHIPS - HYDRAULIC
NEW - WITH WARRANTY
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Specifications:
|
Model |
unit |
3CH-83A-160 |
3CH-Y83-160 |
3CH-Y83-230 |
3CH-Y83-300 |
3CH-Y83A-300 |
3CH-Y83-800 |
3CH-Y83-1000 |
|
|
Nominal Force |
KN |
1600 |
1600 |
2300 |
3000 |
3000 |
8000 |
10000 |
|
|
Briquetting Size |
Mm |
Φ90× （60-85） |
Φ90× （60-110） |
Φ110× （70-120） |
Φ120× （70-120） |
Φ120× （70-120） |
Φ180× （165-18） |
Φ220× （200-25） |
|
|
Briquetting Density |
Kg/m3 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
|
|
Working Pressure |
Mpa |
23 |
16 |
23 |
21 |
26.5 |
25 |
25 |
|
|
Production Rate |
t/h |
0.6-0.9 |
0.6-0.9 |
1.0-1.5 |
1.2-1.8 |
1.2-1.8 |
6-7.5 |
8.5-12 |
|
|
Total Power |
Kw |
24.2 |
24.2 |
39.2 |
47.2 |
49 |
185 |
225 |
|
|
Machine Weight |
Kg |
4500 |
6000 |
7500 |
8800 |
7500 |
50000 |
60000 |
|
|
Machine Total Size |
Mm |
4900×1470 ×1522 |
4100×1086 ×2006 |
4100×1086 ×2006 |
5000×1600 ×2600 |
4000×1400 ×3700 |
8000×6500 ×2500 |
9000×7500 ×2500 |
|
Metal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.
Fully hydraulic control equipment, the electric equipment main control part adopts PLC control, the whole working process can realize the automatic operation, reduce the labor intensity and labor.
The system is provided with a manual work procedures, easy to realize the move forward and backward, the mold open and close action adjustment.
The device is provided with one time and two times feeding program,easy to press different size of metal chips
According to customer requirements can increase the automatic feeding, discharging device
Hydraulic system adopts two-ways cartridge valve, with the good sealing performance, good open and close characteristics, pollution resistant etc advantages.
Special unloading loop and the liquid electrical switch protection circuit is arranged in the hydraulic system, to make the machine run smoothly, but also improve the service life of hydraulic components.
The electric control adopts the manual, automatic and two times feeding technology, can conveniently adjust the operation mode and the feeding length, in order to get the material pressing block suppression of different materials and sizes.
The machine adopts the micro movement hopper on pressing device, solved the not easy to feed and discharge problem, also reduce the abrasion of the guard of discharging.
The hydraulic cylinder adopts the main pressure cylinder and fast forward cylinder connected to form the composite cylinder, improve the operating speed, reducing the energy consumption of the motor, but also improve the production efficiency.
The machine adopts PLC control
The machine pressed metal block has large diameter, high density, resist broken, good surface finish, not easy oxidation etc. advantages.
This machine adopts a fully enclosed structure form, can recycling cutting fluid in the metal chips and prevent oil leaking pollution.
Compact different kinds of chips like cast iron, aluminum, copper, magnesium, titanium, molybdenum etc. metal crap chips into high density blocks without any additive, greatly reduce the casting cost.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LINEA ARMADO CHAPAS
PARTE # 11915 - LINEA AUTOMATICA DE DOBLE CORTE DOBLE ENCOLADO ABRIDOR DE PAQUETES DE CHAPA MONGUZZICompuesta de:- 1 Máquina PULCHRA mod. 45/3800 de doble corte doble encolado (SE ADJUNTA HOJA TECNICA) Año 2009. Equipada con pantalla, y cámara en la parte trasera, permite al Operario ver la parte posterior de la máquina para controlar el corte y encolado- 1 Vía de rodillos motorizado para la salida de paquetes de chapa de la máquina PULCHRA- 1 Abridor de paquetes MONGUZZI- 1 Vía de ...
AMXmachinery
PARTE: 12581 – CHAFLANADORA - HAZELTHORN
PARTE: 12581 – CHAFLANADORA - HAZELTHORNUSADA – BUENAS CONDICIONES
AMXmachinery
GUILLOTINA CHAPA 1 NAVAJA
PARTE # 3NN-CUTMATE3200 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 3200 MMPARTE # 3NN-CUTMATE2800 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 2800 MMSpecificationsModelCutMate 3200CutMate 2800Cutting Length3200 mm2800 mmDaylight Opening120 mm120 mmElectric Powerapprox. 7.5 kwapprox. 7.5 kwCutting Width25 ~ 650 mm25 ~ 650 mmPack Beam Width150 mm150 mmDimensions (L x W x H)5000 x 1750 x 1850 mm4600 x 1750 x 1850 mmNet Weightapprox. 4800 kgapprox. 4450 kgColorRAL 8019 / RAL 9003RAL 8019 / RAL 9003 Than...
AMXmachinery
CORTADORA METAL
PARTE: 2AC-3001-25 - GUILLOTINA PARA METAL – CAPACIDAD 25” LARGO Cortadora de Metal Uso Rudo de 25" Modelo 3001La cortadora esta construida a estandares industriales, de uso rudo, estable y confiable,Construccion pesada y solida, corta laminados, aluminio, plastico y acero de dureza mediana casi sin esfuerzo y facil de usar.CaracteristicasFacil acceso a las navajas, cortes sin marcas.Accion reversible, las navajas se accionan de derecha a izquierda o viceversa, a su preferencia.La manija p...