Identificador: 1634
Abierta
ID de articulo : # 1634 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
Para uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.
Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.
Características:
– Aspa con diámetros de 16,20, 24 y 26″.
– Volúmenes de aire desde 4,200 hasta 18,725 PCM.
Usos:
– Ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.
|
Modelo
|
Potencia
HP |
Volumen
PCM MC/HR |
|
|
XTAP-16 |
1/2 |
4,200 |
7,136 |
|
XTAP-20 |
3/4 |
13,880 |
13,880 |
|
XTAP-24 |
1 1/2 |
14,530 |
24,686 |
|
XTAP-26 |
2 |
18,725 |
31,814 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRADORA 21 CABEZALES
TALADRADORA 21 CABEZALES PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped with ...
-500x500.jpg)
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
-500x500.png)
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL18Represents a state-of-the-art finger jointing production line, meticulously engineered to transform wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliabi...
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...