Identificador: 1633
Abierta
ID de articulo : # 1633 se ha agregado a su lista de deseos.
Descripción
PARTE: 1AM - EXTRACTOR TUBOAXIAL - EN LINEA
Ideal para llevar aire acondicionado o calefacción de un lugar o habitación a otra, reduciendo el consumo de energía de su equipo central. Fácil instalación en ductos rígidos y flexibles.
Características:
– Para ductos de 4 a 14″ de diametro.
– Caudales desde 50PCM hasta 1250PCM
Usos:
En bares, baños, oficinas, sotanos, bodegas, laboratorios
|
Modelo
|
Potencia
HP |
Volumen
PCM MC/HR |
|
|
AB-4 |
1/250 |
50 |
85 |
|
AB-6 |
1/250 |
150 |
255 |
|
AB-8 |
1/70 |
280 |
475 |
|
AB-10 |
1/40 |
650 |
1,105 |
|
AB-12 |
1/20 |
1,010 |
1,716 |
|
AB-14 |
1/15 |
1,250 |
2,123 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...
AMXmachinery1
TORNO 20'' x 80''
TORNO 20'' x 80'' PARTE: 2GM-GML-2080Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.ISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore ...
AMXmachinery1
COLECTOR DE ASERRIN - 3 HP
PARTE: 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so it can be moved around ...
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX340Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying...