Identificador: 1618
Abierta
ID de articulo : # 1618 se ha agregado a su lista de deseos.
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
AMXmachinery
Descripción
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
Para papel, cartón corrugado y fibras pesadas
BEST USES Removal of continuous film, Edge Trim and Matrix
INDUSTRIES Converting, Paper, Film, Plastic, Non-woven, Foils
IDEAL FOR
paper
light fiber board
corrugated board
solid bleached sulfate paperboard
plastic film
foil laminates
pressure-sensitive stock
light, non-ferrous foils
CAPABILITIES
Materials: Paper, corrugated and heavy fiber board
Trim Width max: 8 1/2" (216 mm)
Caliper Range:
3 mil to 250 mil
0.00300" to 0.25000"
0.0762 mm to 6.350 mm
Air Capacity: 3,000 cfm 5,100 m3/hr
Static Pressure Loss: 1.5" wg. @ 5,000 fpm air velocity
Drive: V-Belt or Direct Drive
Cutting Action: Impact
Rotor speed: 500 to 2,000 rpm
Weight: 355 lbs. (161kg) with motor
Dimensions
L x W x H: 225/8" x 181/2" x 283/4"
(574.7 mm x 469.9 mm x 730.3 mm)
FEATURES
• Rotor-mounted knife-adjustment screws for fast, easy setups
• Multiple knives: HCHC, NEOR, NEOR metal grind, carbide-edge
• Class "O" tapered roller bearings eliminate endplay and runout
• Rotor shaft supported by tapered roller bearings maintains rotor stability for long life
• V-belt, direct or gear-motor drive
• Open-rotor design facilitates passage of air and material
• Multiple mounting arrangements
• Flanged inlet, slip-fit outlet positions
• Multiple inlet positions
• 2 HP 3/60/460-volt TEFC motor is standard
• Motor 2 HP, RPM 2,000 max
STRAIGHT-CUT IMPACT ACTION, FROM PAPER TO FINE METAL FOIL
MAINTAINS CUTTING EDGE WITHOUT IN-PLACE CYLINDRICAL GRINDING
Top Performance
The 5TOB trim cutter offers proven BloApCo design with new, innovative maintenance and operating features to achieve higher performance and economy. Driven by a 2-hp electric motor, the 5TOB impact-cuts everything from paper to tough films to metal foil down to 3 mil thick. Varied knife profiles make short work of corrugated and heavy laminated trim up to 8-1⁄2" wide. A variety of wear-resistant HCHC, NEOR and carbide-edge knives can be arrayed to mate with slitting equipment and can reduce multiple ribbons of trim, depending on weight and thickness, for pneumatic conveying, baling, disposal or recycling.
Precise Operation
Cutting with one stationary bed knife and two rotating knives, the 5TOB makes two cuts per revolution at speeds from 500 to 2,000 rpm and passes 3,000 cfm of air at a static pressure loss of 1.5" wg at air velocities of 5,000 fpm. Rotor-mounted set screws make the knives individually and easily adjustable for maximum precision – and easy to remove for sharpening, with no need for “in-body” rotor grinding. Precision tapered roller bearings eliminate end play and runout problems, keeping clearances precise longer. Open rotor design allows fast, free flow of cut material through the cutter housing.
Easy Installation
Installation of a 5TOB trim cutter is quick and simple: The cutter is factory-tested, tailored to your application, and shipped completely assembled and ready to run.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA RADIAL 4.5 HP
PARTE # SIL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HPNueva con garantiaMotor 4.5 HP, 220V, 60Hz, 3 fasesMedidas de la mesa 34-1/2” x 43-1/4”Diámetro del disco 14”Diámetro del eje 1”Máxima capacidad de corte transversal 24-3/8”Máximo espesor de corte 4-1/8”Movimiento angular del brazo 45 - 0 - 45 gradosMovimiento angular del motor 0 – 22 – 45 – 90 gradosGiro del motor 0 – 180 gradosPeso de la maquina 200 kilosTipo de empaque 1 caja
AMXmachinery
PARTE: 12198-1 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
PARTE: 12198-1 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
USADA – BUENAS CONDICIONESMod. Eco DS0Manufacture year 2000
Multi-channel
to cut 4 boards at same timeInclude 1
frame of 500 mm blade and 1 for 400 mm blades.
480 Volts
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-MEB482 – PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIES
Nueva con garantíaFeatures:Special design to use heating,
vacuum and hydraulic pressure to add or forming the film skin to a shaped,
curved or uneven surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or
PVC sheets.Two operation models: With
silicon membrane for heat transfer normal function or using heating template
for high shining PVC.Automatic 4 function process
model contro...
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10130 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN