Identificador: 1582
Abierta
ID de articulo : # 1582 se ha agregado a su lista de deseos.
Descripción
PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES
460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min.)
- “Carpet” style
feed system with 1,500 spring loaded spikes
- 2 HP 4-column
feed carpet/top-head elevation motor
- (3) bottom &
(3) top powered feed rollers & (4) bottom & (1) top idle feed rollers
- Digital thickness
setting controls with cutterhead motor amp meters
- 34” pass-line
height
- (1) automatic
& (1) manual oiler, (low oil shut-off)
- (4) 6” diameter
dust ports, (~6,000 CFM)
- 90 PSI pneumatic
requirement, (3/8'' diameter inlet)
- 75 dB sound rating
- 115” L x 88” W x
70” H approximate overall dimensions
- Weighs
approximately 15,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA VERTICAL ELCON KING SIZE DSXE
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMWhen do you feel challenged as a company?When a customer asks you to create something out of the ordinary.In this case German trailer manufacturer Brüggen needed a solution to cut 14m long x 3m20 wide sandwich panels for box bodies. Most of them are used to build reefers to transport perishables. We accepted the challenge and delivered this custom built space saving solution. A 320 DSXE 14.300.Looking for something similar, feel free to challeng...
AMXmachinery
PARTE: AMX-10161 - EXTRACTOR DE PARED - ASPAS DIAMETRO 19” - S & P
PARTE: AMX-10161 - EXTRACTOR DE PARED - ASPAS DIAMETRO
19” - S & P
USADO - MUY BUENAS CONDICIONES
BALEROS NUEVOS
MOTOR ½ HP, 110V, 1 FASE
RPM 1625
MARCA S & P
HECHO EN MEXICO
MEDIDAS 25” FRENTE X 25” ALTO X 12”
FONDO
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300
PARTE: 12062 – CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300USADA – MUY BUENAS CONDICIONESIN MINT SHAPEMFG 2014 BUT WAS SOLD NEW JAN 2016INCLUDES LASER PART SENSOR2 ZONE MACHINE WITH 51" WORKING AREAA LASER SENSOR AUTOMATICALLY MEASURES THE WIDTH OF A PANEL AND CALCULATED THE POSITION AND NUMBER OF DOWELS BASED ON A PROGRAM FILETESTEDVIDEO 1: https://vimeo.com/438240935
AMXmachinery
MOLINO PULVERIZADOR - PULVEX 300
PARTE: 12307 - MOLINO PULVERIZADOR - PULVEX 300
USADA - BUENAS CONDICIONES
MOTOR ACTUAL 12.5 HP, 220V, 2 FASES
SE PUEDE COTIZAR MOTOR 10 A 15 HP 220/440V, 3 FASES