Identificador: 1570
Abierta
ID de articulo : # 1570 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EB-WP-031 - ASERRADERO PORTATIL - 14 HP GASOLINA - 31” DIAMETRO
Nuevo con garantía
Engine: Kohler Command Pro CH440 - 14HP Electric Start
Displacement: 429CC
Start type: Recoil Electric Start
Oil capacity: 1.16L
Cast iron cylinder liners provide lasting durability
Oil Sentry automatic low oil engine shutdown system
Cutting Capacity: 31" x 7" x 110" ** We can add around 6 feet of track optional
Maximum Board Thickness: 7"
Standard Track Size: 157" x 40.5" ** We have extended track sections if needed
Packing Size: 85" x 23" x 33"
Safe Cutting Speed: 13-15s/m
Blade Speed: 17m/min
Distance Between Teeth: 22mm (.86")
Blade Wheel Diameter: 18.8"
Overall Dimensions: 160" x 70" x 71"
Black Color Trim
Weight: 780lbs sawmill only. Trailer is about another 800lbs
Manual Download
Warranty: 1 Year Parts Warranty Included
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” - MOTOR 7.5 HP - AMX
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” -
MOTOR 7.5 HP - AMX
USADA
- MUY BUENAS CONDICIONES
CAPACIDAD DE CORTE:
ESPESOR MAXIMO: 2-1/4”
ANCHO MAXIMO: 9”
MOTOR
7.5 HP, 230/460V, 3 FASES, 60 HZ, RPM 3465
MOTOR
CONECTADO A 230V, CERRADO, US ELECTRICAL MOTORSVideo: https://vimeo.com/1057662877
AMXmachinery
TORNO DESENROLLADOR - ANCHO 54”
PARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”
1 - TORNO DE DESENROLLO DE 54 PULGADAS (4 PIES) SEMI-AUTOMATICO
MARCA IND. G.H. PARA DESENROLLAR TROCERIA DE 4 PIES DE LARGO Y DIAMETRO DE 25
PULG. MAXIMO GROSOR DE .08 HASTA 5.MM ACCIONADO CON CADENAS DE AVANCE Y MOTORES
DE 5,10,15 HP CON CAPACIDAD DE 30 TONELADAS DE DESENROLLO DIARIAS.
AMXmachinery
INDEX TABLE
PARTE # 11903 – INDEX TABLE – EVANS MACHINERY 4253Very good condition5' x 12' capacityIncluding roller section between panel support railsRails equipped with beveled rollers to transport panel to end stopEnd stop with bump switch to activate panel dropPanel is driven to end stop with powered drive rollerElectric 230 volt, cycle, 3 phase
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBAPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADOPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOSNueva con garantiaDesigned for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.The brush, flap whee...