Identificador: 1527
Abierta
ID de articulo : # 1527 se ha agregado a su lista de deseos.
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
AMXmachinery
Descripción
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
USADA – MUY BUENAS CONDICIONES
9-3/8″ max. arbor length
Tool dia. 11-3/4″ max. to 4″ min
Grinding wheel speed inverter controlled
Grinding wheel speeds from 1,500 to 3,000 RPM
1.5 HP motor
hydro-clamping of grinding wheel to arbor
Setting gauges for axial constant
Axial clearance angle 0-20 degree
On board diamond wheel dressing
8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-VAC481 – PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
Nueva con garantíaFeatures:Special design for using heating
and vacuum pressure to add form or film skin to a shaped, curved or uneven
surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC
sheets.Automatic controlled by PLC for
suitable and easy operation.Double-layer and fully sealed
heat preservation.Advance heating temperature
digital control by computer for the best adjus...
AMXmachinery
PARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA
PARTE: 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1 strip)min. 75 mm (85 mm for 1 strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimensions ...
AMXmachinery
LIJADORA PARA CURVOS Y RECTOS BRUSA LT-80
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOSMARCA: BRUSAMODELO: LT-80PARA PULIR- PALO DE ESCOBA- REDONDOS- MANGO DE HERRAMIENTA- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm
AMXmachinery
TRIPIE PARA MOTORES 750 LBS
PARTE: 1SL-DC-ES750 - TRIPIE PARA CARGAR MOTORES DE HASTA 750 LBS