Identificador: 1520
Abierta
ID de articulo : # 1520 se ha agregado a su lista de deseos.
Descripción
PARTE: AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12446 - MOLDURADORA - 5 CABEZALES - PROFIMAT 235
PARTE: 12446 - MOLDURADORA -
5 CABEZALES - PROFIMAT 235
USADA - BUENAS CONDICIONES5 heads bottom, right, left, top, bottom9-1/16" x 4-11/16" capacity20-78 FPM variable feedMechanical readouts on all spindlespowered out feed rollerstraightening vane
Mfg: 1996440 volt, 3 phase, 60 cycle
AMXmachinery
MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
PARTE:12312
- MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
USADA - BUENAS CONDICIONES
Mfg. 1997
Eleltronic drive, Hydro jointers, 1 manual
jointer.
1&13/16" spindles.
AMXmachinery
LIJADORA DE CEPILLOS – 53” ANCHO – 3 ESTACIONES - LOEWER
PARTE: 12154 – LIJADORA DE CEPILLOS – 53” ANCHO – 3 ESTACIONES - LOEWERUSADA – MUY BUENAS CONDICIONES- 53" WORKING WIDHT - 3-STATION BRUSH SANDER- 3 ROW DISC SANDING STATION, FOLLOWED BY 2 COUNTER ROTATING SPIRAL BRUSH ROLLERS AND A PLANETARY STATION- DISC-STATION - 16 SANDING DISCS 250MM DIAMETER, EACH WITH 24 KEYWAYS 75MM LONG- ROTATING ROLLER SPINDLES - 2 SPINDLES 90 DEGREE TO THE FEED, SPINDLE DIAMETER 50MM, FOR MAX, BRUSH DIAMETER 400MM- PLANETARY STATION WITH 3 ROTATING HEADS EAC...
AMXmachinery
TALADRO MULTIPLE HORIZONTAL
PARTE # 2TA-BR-52 – TALADRO MULTIPLE HORIZONTAL DE 1 LADO – 50” LARGONew with warrantySuitable and affordable for industrial and small workshop use.Capable of using "multiple drill head" for the drill distance less then 2".Easily adjust the drill position and add more drill spindles.Pneumatic clamp and drill head travel operated by foot pedal, hands free.Pneumatic and hydraulically stroke control for max. drilling power.Each spindle can be horizontally adjusted in position quickly.Cast iro...