Identificador: 1487
Abierta
ID de articulo : # 1487 se ha agregado a su lista de deseos.
Descripción
PARTE: 12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO – MUY BUENAS CONDICIONES
Year 2002
Motor Power 37,4 kW
Voltage 400 V (three-phase)
C.E. Yes
Abres 4
Largueur min/max. Travail 420 mm
Hauteur min/max. Travail 11 - 300 mm
Longueur table travail 1000 mm
Total Nº axis 4
Bottom horizontal axis Yes 11 kW
Drill right axis Yes 6,6 kW
Drill left axis Yes 6,6 kW
Upper horizontal axis Yes 13,2 kW
Vitesse d avance 3-30 m/min
Diametre rouleaux avancement 90 mm
Drag upper number 3
Transmission Type Cadena
Weight 2500 Kg
Dimension 2800x2100x1680 mm
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2WR-3000 – SOLDADORA DE MADERA – ALTA FRECUENCIAGENERAL SPECIFICATIONS13 FOOT COAXIAL CABLESTANDARD HAND UNITMAXIMUM VOLTAGE 115 VACMAXIMUM CURRENT 15 AMPSFREQUENCY 27.12 M.C.RADIO FREQUENCYCERTIFICATE ATTACHEDPENETRATES 1 ½ INCHES OF WOODSHIPPING WEIGHT 134 LBS. SPECIAL FEATURESONE HAND OPERATION - leaves other hand free.RECESSED PANEL - protects instruments.RADIO FREQUENCY CERTIFICATE - per F.C.C. Regulations.13 FOOT COAX CABLE - reaches most jobs.LIGHT WEIGHT HAND UNIT - 2 lbs. 1...
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16...
AMXmachinery
TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
PARTE
# RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4
HP Spindle Drive Motor, TEFC
60″
Back Fence Assembly
(1)
13-Vertical Gear Driven Spindle Rows
10mm
Bored Collets
(7)
Right Hand, (6) Left Hand
(2)
Index Pins
20″
X 48″ Work Table Surface
Wired
1-Phase 120 Volt, 60 Hz.
Manually
Actuated Boring Cycle
Tooling
Not Included
Crated
Dimensions: 45″ X 80″ X 44″ and 508...