Identificador: 1486
Abierta
ID de articulo : # 1486 se ha agregado a su lista de deseos.
Descripción
PARTE: 12282 – REASERRADORA – 2 BANDAS ARRIBA Y ABAJO – WOODMIZER
NUEVAS O COMO NUEVAS
1 máquina completa
1 maquina no tiene motores, pero si tiene los controles intactos
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE
METALES FINOS - BLOAPCO - MODEL 5TOB
Para papel, cartón corrugado y fibras pesadasBEST USES Removal of continuous film, Edge Trim and MatrixINDUSTRIES Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foils CAPABILITIESMaterials:
Paper, corrugated and heavy fiber boardTrim
Width max: 8 1...
AMXmachinery
PARTE: AMX-10140 - EXTRACTORES CENTRIFUGO - MOTOR 1.5 HP, 230V, 1 FASE
PARTE: AMX-10140 - EXTRACTORES CENTRIFUGO - MOTOR 1.5 HP,
230V, 1 FASE
7 PIEZAS EN EXISTENCIAS
USADO - BUENAS CONDICIONES
MEDIDAS: 11.5” ANCHO X 14.5” FONDO
X 14” ALTO
MOTOR 1.5 HP, 230V, 1 FASE (1.1 KW),
CERRADO
ENTRADA REDONDA: 5.5”
SALIDA RECTANGULAR: 5” X 4.5”
HECHOS EN EUROPA
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...