Identificador: 1336
Abierta
ID de articulo : # 1336 se ha agregado a su lista de deseos.
.png)
.jpeg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
Two Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP - DAYTON
PARTE: AMX-10154 - EXTRACTOR DE TURBINA - 1.5 HP -
DAYTON
USADO - MUY BUENAS CONDICIONES
MODELO: 4C329
MOTOR: 1.5 HP, 208/230/460/380V, 3
FASES
ENTRADA REDONDA: 7”
SALIDA RECTANGULAR: 4” X 5”
MEDIDAS TOTALES: 18” ANCHO X 16”
FONDO X 20” ALTO
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORA
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORAStandard Features:ISO 9001 certifiedHP Heavy Duty AC main motor, 110VHeavy welded all steel construction for maximum rigidityStandard Pittsburgh AttachmentStandard Round Power Flange Attachment & Right Angle, Double Seam Rolland Drive Cleat Roll , all in one, no installation is required ACME side can be operated at same timeHeavy Duty caster wheels for easy movingOne year warranty for parts Standard Eq...
-500x500.jpg)
AMXmachinery
LIJADORA DE CEPILLOS QUICKWOOD
PARTE: 11799 – LIJADORA DE CEPILLOS – QUICKWOODGOOD CONDITIONS- MODEL: RO-1100- (460/60/3 electrics)- 44" wide x 4" thick max. work-piece dimensions- (2) counter-rotating "carrousels" with (4) rotating sanding heads each- (8) rotating "hex" spindles can be equipped with a variety of materials- (3 to 16) RPM of carrousel and (300 to 1,200) RPM variable spindles- Electronic digital speed readouts- (33) 5" diameter "quick discs" per spindle, (264) total- 6 HP main motors, 1.5 HP rotation motors...