Identificador: 1335
Abierta
ID de articulo : # 1335 se ha agregado a su lista de deseos.
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2MA-640CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg. On right
side...
AMXmachinery
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO
- MUY BUENAS CONDICIONESCoAire CHSA-30
230/440V,
60 Cy, 3 Phase
Main
Motor: 30 HP
Discharge
Pressure: 150 PSI
Air
Delivery: 100 CFM
Compressor
Speed: 3050 RPM
Ambient
Temperature: 32 Deg. - 115 Def. F
Driving
Method: V-Belt (3VX4)
Oil
Sump Capacity: 5 Gallons
Dimensions:
55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232Filters have been replaced, its been flushed out and has new
oil.The last hours recorde...
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-MEB482 – PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIES
Nueva con garantíaFeatures:Special design to use heating,
vacuum and hydraulic pressure to add or forming the film skin to a shaped,
curved or uneven surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or
PVC sheets.Two operation models: With
silicon membrane for heat transfer normal function or using heating template
for high shining PVC.Automatic 4 function process
model contro...
AMXmachinery
PARTE: AMX-10087 - VENTILADORES DE PARED - 4 ASPAS DE 22” A 30” DIAMETRO
PARTE: AMX-10087 - VENTILADORES DE PARED - 4 ASPAS DE 22”
A 30” DIAMETRO
AMX-10087-1
= 1 PIEZA - ASPAS 22” DIAMETRO - MOTOR CERRADO
AMX-10087-2
= 1 PIEZA - ASPAS 28” DIAMETRO - MOTOR ABIERTO
AMX-10087-3
= 1 PIEZA - ASPAS 28” DIAMETRO - MOTOR CERRADO
AMX-10087-4
= 1 PIEZA - ASPAS 29-3/4” DIAMETRO - MOTOR CERRADO
AMX-10087-5
= 1 PIEZA - ASPAS 30” DIAMETRO - MOTOR ABIERTO
USADO - BUENAS CONDICIONES
MOTORES 1-1/2 HP, 2 HP, 208V, 220V,
230/460V, 3 FASES9 ...