Identificador: 1299
Abierta
ID de articulo : # 1299 se ha agregado a su lista de deseos.
.jpg)
REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
AMXmachinery
Descripción
PARTE: 2FA-RM6X6-4 - REASERRADORA HORIZONTAL - 4 BANDAS - ANCHO 8” - (4) 15 HP - REGRESADORA
NUEVA CON GARANTIA
- ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Powered Belt Return w/ Adjustable Height Sheer Plate
- Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min)
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 70” L, 93” W, 47” H
- Approx. Weight: 1840 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
PWR_HD_6X6
- Top Mounted Powered Tire Hold Down Wheel
HYD_KIT
6 x 6 RESAW HYD COMPONENTS
(3) - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Self- contained Hydraulic System Runs off First Saw
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 60” L, 90” W, 48” H
- Approx. Weight: 1340 lbs
GUIDE_KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
HD_SLAVE
- Top Mounted Powered Tire Hold Down Wheel
PWR_HD_HYD KIT
RS6X8 HYD KIT
AIR_HOLD_OVER_SLAVE
RESAW HOLD-OVER KIT FOR SLAVE MODEL
FRAME 6X6_MID
Slave Middle for 6x6 Return Resaw
FRAME_6X8_MID
Slave Mid Frame Rail for Behind 6X8
FRAME_6X8_END
Slave End Frame to Slave Middle or RM6X8
RESAW-(4)15HP_480_PUMP
4 HEAD Control Panel
- (4) 15 HP Blade Motors (230/480/3/60 TEFC)
- (1) 5 HP Pump Motor (230/480/3/60 TEFC)
- 480V Line Voltage
- 24" Tall X 20" Wide Enclosure (UL Type 1,3R,4,12)
- Enclosure Mounted to Hydraulic Pump Stand
- 480V Primary/ 120V Secondary Control Transformer
- Service disconnect in panel door
- (4) 15HP 480V Motor starters, breaker w/OL
- (5) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2, Head 3, Head
4, Hydraulic Pump)
- (1) Emergency Stop Button w/ legend plate
- All controls mounted in plastic remote enclosure
- Completely for 480V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit
Overload Protection
- Controls Mounted at Operators Station
- 85.8 FLA
4 HEAD HYD
4 Head Resaw Pump System
- 40 Gallon Hydraulic Revivor
- 10 GPM Pump
- Pump Stand
STARTUP KIT 1
- 25 Blades
- Extra Set of Guides
- Grease gun with tube of grease
- 9/16 Wrench
- 3/4 Wrench
- 1-1/8 Wrench
- Toolbox
Popular Options
- Multiple Support Heads
- Air Tension Hold Over Plate (For Ripping Material)
- Pre-wired for 230, 480, 575V 3 Phase
- Pre-wired 220V 10HP Motor Single Phase
- Gas Powered Honda GX690 Power Plant
- 6” Height Right Side Fences
- Left Fences for Ripping
*** Other options available
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP
PARTE: 12341 - COMPRESOR DE TORNILLO - 50 HP
USADO - BUENAS CONDICIONES
230/460V
Nominal 100 PSI, 110 Maximum
Nominal 236 Cubic Feet Per Minute Depending on Pressure
Setting
Variable Frequency Drive
Weight: 3000 lbs
Dimensions: 48" L x 72" W x 64" H
Recently serviced and ready to go!
AMXmachinery
PARTE: AMX-10072 - SIERRA ESCUADRADORA VERTICAL - HOLZ-HER 1265 SUPER CUT
PARTE:
AMX-10072 – SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUTUSADA – MUY BUENAS CONDICIONESMOTOR: 4 HP (3KW) 220V, 3 FASES, 60 HZNAVAJA INCISORAPROFUNDIDAD DE CORTE: 2 PULGADASDIAMETRO DE DISCO CORTADOR: 8-1/4 PULGADAS, 1-3/16” FLECHAMEDIDAS MESA: LARGO 510 CM X ALTO 225 CM X ANCHO 90 CM – PESO: 850
KG APROX.MEDIDAS ENVIO: LARGO 514 CM X ALTO 235 CM X ANCHO 150 CM – PESO:
1,000 KG APROX.EN TARIMA LISTA PARA ENVIO
MANUAL...
AMXmachinery
PARTE: AMX-12493 - EXTRACTOR DE PARED - DAYTON
PARTE: AMX-12493 - EXTRACTOR DE PARED DAYTONUSADO - MUY BUENAS CONDICIONESMedidas totales: 24” ancho x 19”
fondo x 28” altoAspas Diámetro: 24”Motor: ½ HP, 115/230V, 1 fase, 60
Hz, Amp 7.6/3.8, marca Dayton
Video: https://vimeo.com/870512971