Identificador: 1271
Abierta
ID de articulo : # 1271 se ha agregado a su lista de deseos.
ID de articulo : # 1748 se ha agregado a su lista de deseos.
Descripción
PARTE: 4VE-VS350-L5-W - LAMINADORA DE MOLDURAS – PUR HOTMELT
Nueva con garantía
Para recibir cotización formal y detallada avísenos
General Features
This machine is designed to cover MDF, PVC and Alumınum profiles with PVC, PP, Finish Fail [Paper] fail by apply SOLVENT [PU] glue.
Drives with frequency control,
The units of cleaning and pre-working lor top and sides,
Solvent glue application tank
The control system with easy-to-use,
Easy-to-use quick-change winder system
Easy-to-use quick-change winder system
Silicone rubber rollers
Edge control system with precision fastening
Primer unit system
Protective tape attaching unit
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO
AMXmachinery
DESORILLADORAS
DESORILLADORAS LM E25G Edger:- 25 HP Kohler® engine.- 13" carbide tipped split blades.LM E26D Edger:- 26 HP CAT® diesel engine.- 15" carbide tipped split blades. CARACTERISTICAS ESTANDAR:Hydraulic feed of the board through the bladesHydraulic adjustment of the moveable blade and board setworks.4 industrial infeed and 4 outfeed adjustable rollers.7' infeed and 7' outfeed roller bed.Highway approved trailer with 15" tires and 3500 lb. capacity axle.Easy to read scale stick at the front of the ...
AMXmachinery
PARTE: 12448 - MESA DE TIJERA - HIDRAULICA - 1.22 x 1.22 METROS - 5000 LBS
PARTE: 12448 - MESA DE TIJERA - HIDRAULICA -
1.22
x 1.22 METROS - 5000 LBS
USADA - BUENAS CONDICIONES