Identificador: 1249
Abierta
ID de articulo : # 1249 se ha agregado a su lista de deseos.
Descripción
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear Driven Spindles on 32mm Centers
Index Pins
3 HP Spindle Drive Motor, TEFC
10mm Bored Collets
(12) Right Hand, (11) Left Hand
12″ Throat Depth
60″ Back Fence With (4) Stops
24″ X 48″ Work Table Surface
(2) Spring Operated Hold Downs
Wired 3-Phase 240/480 Volt, 60 Hz.
Pneumatic Driven Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 78″ H and 740 Lbs
Options
R19F1 – Single Phase Machine
An upgrade to the R113, this unit is foot pedal operated. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD ANCHO 16” - POWERMATIC
PARTE: 12267 - CEPILLO 1
CARA - CAPACIDAD ANCHO 16” - POWERMATIC
USADO
- BUENAS CONDICIONES
MODELO
160
MOTOR 3
HP, 115-208/230V, 1 FASE, 60 HZ, 3450 RPM
AMXmachinery
ASTILLADOR GASOLINA 6.5 HP
PARTE: 2AR-62323 - ASTILLADOR A GASOLINA - MOTOR 6.5 HP PREDATORNuevo con garantíaAstilla ramas hasta 3” diámetroRotor Uso Moderado a Rudo para volumenBueno para limpiar desperdicios de madera, podas, etc.Reduce el volumen del desperdicio hasta 20:1Peso: 65 kgMedidas envio: 70 cm ancho x 65 cm fondo x 85 cm alto x 80 kg pesoVideo de la maquina funcionando: Video 1
AMXmachinery
DEBARKER CAMBIO 30”
PARTE # 11606 - DEBARKER – SODERHAMN/KOCKUMS - CAMBIO RING 30”EN BUENAS CONDICIONES DE OPERACIONSimple band style ring tensionHydraulic powered feed rolls