Identificador: 1248
Abierta
ID de articulo : # 1248 se ha agregado a su lista de deseos.
Descripción
PARTE # RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4 HP Spindle Drive Motor, TEFC
60″ Back Fence Assembly
(1) 13-Vertical Gear Driven Spindle Rows
10mm Bored Collets
(7) Right Hand, (6) Left Hand
(2) Index Pins
20″ X 48″ Work Table Surface
Wired 1-Phase 120 Volt, 60 Hz.
Manually Actuated Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 44″ and 508 Lbs
Designed and Manufactured in the USA
The starting point for our line boring machines, this unit is both affordable and built to last. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
AMXmachinery
PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
PARTE:
2LB-PT-VAC481 – PRENSA DE MEMBRANA – 1 MESA – 4 X 8 PIES
Nueva con garantíaFeatures:Special design for using heating
and vacuum pressure to add form or film skin to a shaped, curved or uneven
surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC
sheets.Automatic controlled by PLC for
suitable and easy operation.Double-layer and fully sealed
heat preservation.Advance heating temperature
digital control by computer for the best adjus...
AMXmachinery
BRIQUETTER - METAL CHIPS - HYDRAULIC
PART:
3CH-83A-160-E - BRIQUETTER - METAL CHIPS - HYDRAULIC
NEW - WITH WARRANTYMetal scrap briquetting press machine can compact the different kinds of chips like cast iron,aluminum,copper,magnesium,titanium,molybdenum etc metal crap chips into high density blocks without any additive,greatly reduce the casting cost.Specifications:
Model
unit
3CH-83A-160
3CH-Y83-160
3CH-Y83-230
3CH-Y83-300
3CH-Y83A-300...
-500x500.jpg)
AMXmachinery
PARTE: 2MA-FP-5285 - LIJADORA - CALIBRADORA DE METAL - 52" ANCHO - 1 LIJA
PARTE: 2MA-FP-5285 - LIJADORA - CALIBRADORA DE METAL - 52" ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/...