Identificador: 119
Abierta
ID de articulo : # 119 se ha agregado a su lista de deseos.
Descripción
PARTE # SIL-DC-CM12.5-B - CEPILLO 12.5" PORTATIL
MOTOR: 2 HP, 110V, 60 Hz, 1 FASE
CAPACIDAD DE CORTE: 12.5" X 6"
MAX. PROFUNDIDAD DE CORTE: 12.5" X 1.2MM, 3.2 MM X 5"
VELOCIDAD DE CABEZAL: 6500 RPM
CORTES POR MINUTO: 13,000
CANTIDAD DE CUCHILLAS: 2 PIEZAS (DOBLE FILO)
PESO: 34 KGS
TIPO DE EMPAQUE: 1 CAJA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2MA-640CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg. On right
side...
AMXmachinery
POSTFORMADORA MIDWEST AUTOMATION 2903
PARTE # 11833 - POSTFORMADORA - MIDWEST AUTOMATION 2903En buenas condicionesPostforma produccion continua, ejemplo cubiertas de cocina, etcPostforms modern shapes in a continuous flow-trough operationContactenos para mas informacion y especificaciones
AMXmachinery
ENCHAPADORA CON PRE-ENGOMADO
PARTE: 2SS-60HA - ENCHAPADORA DE CANTOS – AIRE CALIENTEReduce the amount of lumber discarded due to unsatisfactory edge banding installation.The 60HA features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more.The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution.FeaturesDimensions (Shop): 60"L x 40"H x 36"DPower Supply: ...
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.