Identificador: 1175
Abierta
ID de articulo : # 1175 se ha agregado a su lista de deseos.
Descripción
PARTE: HA250W – SIERRA CINTA – AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine Specifications
Cutting Capacity
Round (Diameter) 1.18"-10"
Rectangle (W x H) 11.8" x 10"
Work Load Capacity 3,307 lbs.
Material Index Stroke 15.75" (Maximum 9 Times Index)
Index Length 0.394" x 141.7"
Saw Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade Speed 89-295 ft./min, 60 Hz, Stepless
Saw Blade Motor 5 HP
Hydraulic Pump Motor 1 HP
Cutting Fluid Pump Motor 0.25 HP
Voltage Required
AC220V±10%, 3 PH, 60 Hz
Or AC440V, 3PH, 60Hz
Machine Dimensions
Head Up Position 76.5" x 93.1" x 69.8" (W x L x H)
Head Down Position 76.5" x 93.1" x 50.6" (W x L x H)
Table Height 27.6"
Machine Weight 3,307 lbs.
HA250W - Model - HA250W with Machine Standard Features
Blade - SVGLB 1 1/4" x 0.042" x 4/6 TPI x 11´6" (start-up blade)
OPTIONAL ITEMS
6' Dead Roller Table Free Standing
10´ Dead Roller Table free standing
Vertical clamps
Vise Pressure Control
Extended warranty - additional year in parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285
AMXmachinery
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPA
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPAChapa Pre-Engomada requerida Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mm(solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)Veneer Strip Length：min. 200 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 30 m/min.Electric Power：approx. 5.9 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：800 mmDimensions (L x W x H)：1...
AMXmachinery
POSTFORMADORA CONTINUA 1 LADO
PARTE # 2EV-6000 - POSTFORMADORA CONTINUA 1 LADO - EVANS 6000220 Volt 1 phase, 220 volt 3 phaseStandard Features:Floating Laminate Trimmer (conventional router)Three phase machines require a separate 110 connection Quick-change 90 and 180 degree roller assembles.Infrared radiant panel heater (instant on / off)Foot print: 130”L X 36”W X 50”HMaximum Feed rate 15 feet per minute.Feed motor: 1/3 hp variable speed DC drive.Crated dimensions 125 x 40 x 60Created weight 1750 LBS....
AMXmachinery
PARTE: 12269 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12269 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE PARA TERRACERIA
MOVIMIENTO LATERAL DE CARGA
TORRE LEVANTE 3 SECCIONES
GAS LP