Identificador: 1171
Abierta
ID de articulo : # 1171 se ha agregado a su lista de deseos.
Descripción
PARTE: 2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12”
NUEVA CON GARANTIA
The widest cutting resaw available in our line of products.
If your looking for a low cost solution to cutting up to 12" wide material, look no further.
These saws are equipped with 20HP motors and 10" wide conveyor belts.
Standard Features
Air Tensioned Blade System
Enclosed Hydraulic System
Easy Height Adjustment
Machine Specs
Dimensions
Length: 84"
Width: 84"
Height: 48"
Feed Belt Height: 34"
Power
20 HP Electric Motor: 208/230/480/3/60 TEFC
Completely pre-wired motor starter with start/stop buttons and circuit overload protection
Specifications
4" Dust Connection (400 cfin)
Approx. 1500 lbs
Uses 15'1" Bands (3/4" to 1-1/4" Wide)
Top Mounted Roller Hold Down
Heavy Duty 2-7/16" Arbors & Bearings
20" Band Wheels
Self Contained Hydraulic System with Variable 0-120 Feed Per Minute Feed Speed
3" Tall Right Side Fence
Capacities
Board Width: up to 12"
Board Thickness: 1/4" - 6"
Board Length: Unlimited
Options
Power Options
22 HP Honda Gas Motor
30 HP Kubota Diesel Motor
Line Shaft: Available Without Power Set to Run off Line Shaft
Single Phase 10 HP
Machine Options
Taller Fences
Custom Conveyor Length
Powered Hold Down
Roller Guides
Larger Band Wheels
Air Tensioned Hold Over Plate
System Options
Tailing Belt
Guide Surfacing Machine
Cant Sizer
Merry Go Round Return
Green Chain
Shingle Belt
Infeed/Outfeed Powered Roller Case
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLANTA DE LUZ 4,200 WATTS
PARTE: 1PW-4200 - PLANTA DE LUZ 4,200 WATTSMODELOPW-4200FASESMONOFASICAARRANQUEMANUALCAPACIDAD MAXIMA4200 WATTSCAPACIDAD NORMAL3360 WATTSVOLTAJE120 VOLTSAMPERAJE20 AMPMOTOR7 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE15 LTSFUNCIONAMIENTO AL 50% DE CARGA12 HRSPESO43 KGS
-500x500.jpg)
AMXmachinery
SANDER QUICKWOOD ELITE PRO1100
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100Machine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)* ACOUSTIC INSULATION...THIS SAN...
AMXmachinery
PARTE: 2GM-PBR - ROLADORA ELECTRICA - 8-10 PIES
PARTE:
2GM-PBR - ROLADORA ELECTRICA - 8-10 PIES
RODILLO
DOBLADOR ENDURECIDO DE 8 – 10 PIES2GM-PBR-0812E
- ROLADORA - 8’x 12 Ga - Movimiento Electrico del Roll, 4hp, 220/440v, 3ph2GM-PBR-0810E
- ROLADORA - 8’x 10 Ga - Movimiento Electrico del Roll, 4hp, 220/440v, 3ph2GM-PBR-1012E
- ROLADORA - 10’x 12 Ga - Movimiento Electrico del Roll, 5.5hp, 220/440v, 3ph
2GM-PBR-1010E
- ROLADORA - 10’x 10 Ga - Movimiento Electrico del Roll, 7.5hp, 220/440v, 3ph
AMXmachinery
CEPILLO 2 CARAS 14", 16", 20", 24"
PARTE # 1N-CP2-016 - CEPILLO 2 CARAS - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP2-020 - CEPILLO 2 CARAS - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP2-024 - CEPILLO 2 CARAS - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP2-029 - CEPILLO 2 CARAS - 29" ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTORES PRINCIPALES (2)5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1...