Identificador: 1170
Abierta
ID de articulo : # 1170 se ha agregado a su lista de deseos.
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
AMXmachinery
Descripción
PARTE: 2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is equipped with a powered hold-down and an innovative powered belt return, which is self adjusting and offers operators the ability to fine-tune the return belt height and angle to fit your specific mix of products.
When setting the sawblade to the desired board thickness, the feed belt conveyor and the return belt are all simultaneously adjusted to maintain optimum height for peak performance
- ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity
- 4” Dust Connection (No dust collector required)
- Heavy Duty 2-7/16” Blade Arbors and Bearings
- 20” Band Wheels
- Air Tensioned Blade Mechanism
- Powered Belt Return w/ Adjustable Height Sheer Plate
- Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min)
- Easy Crank for Adjustable Blade Position
- 3” Right Side Fences
- Feed Belt Height: 34”
-Dimensions: 70” L, 93” W, 47” H
- Approx. Weight: 1840 lbs
GUIDE KIT
- 15’1” Long X 1” Wide Bandsaw Blade
- 3/4" Composite Guide Blocks
*** 1.25" Blade Available
*** Roller Guides Available
PWR_HD_6X6
- Top Mounted Powered Tire Hold Down Wheel
RM6X6 HYD_KIT
6 x 6 RESAW HYD COMPONENTS
15HP_480/3/60
- 15 HP Motor (230/480/3/60 TEFC)
- Completely Prewired for 480V
- Motor Starters with Start/ Stop Buttons and Circuit Overload Protection
- Mounted at Operators Station
- 18.1 FLA
STARTUP KIT 1
- 25 Blades
- Extra Set of Guides
- Grease gun with tube of grease
- 9/16 Wrench
- 3/4 Wrench
- 1-1/8 Wrench
- Toolbox
POPULAR OPTIONS:
- Multiple Support Heads
- Air Tension Hold Over Plate (For Ripping Material)
- Pre-wired for 230, 480, 575V 3 Phase
- Pre-wired 220V 10HP Motor Single Phase
- Gas Powered Honda GX690 Power Plant
- 6” Height Right Side Fences
- Left Fences for Ripping
*** Other options available
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA CENTAURO 23"
PARTE # 1RU-CE-SP-600-3 - SIERRA CINTA CENTAURO 600 MMDiametro de las volantes 600 mm Peso neto aproximado 240 Kgs Altura maxima de la guia 330 mm Ancho maximo de corte 580 mm Largo de la banda de sierra 4580 mm Ancho maximo de la banda de sierra 30 mm. Dimensiones de la mesa 580 x 810 mm Altura de la mesa desde el piso 910 mm Fuerza del motor 3 H.P., 3 fasesAltura total de la maquina 2060 mm
AMXmachinery
MESA DE TIJERA 36" X 72"
PARTE:
2SW-LS4-36 - MESA DE TIJERA - PLATAFORMA 36" X 72"Nuevas con garantíaHechas en USAMedidas y capacidad
para manejar 1 bulto de MDF, Aglomerado, etc. a la vez para alimentar
maquinaria para la madera,CAPACITY: 4,000 lb. uniform load.PLATFORM: 36" x 72" smooth
plate with 4" Fork Risers.BASE FRAME: 24" x 48" with lag plates
and maintenance device.LOWERED HEIGHT: 6-3/4"VERTICAL TRAVEL: 36"RAISED HEIGHT: 42-3/4"ELEVATING TIME: 44 seconds (approx.)LOWERING TIME: Adjustable with p...
AMXmachinery
PARTE: 12617 - COMPRESOR DE TORNILLO – SECADOR - 70 HP – INGERSOLL RAND
PARTE: 12617 - COMPRESOR DE TORNILLO – SECADOR - 70 HP – INGERSOLL RANDUSADO - BUENAS CONDICIONESCOMPRESORSECADOR
AMXmachinery
COLECTORES DE ASERRIN PARA EXTERIORES
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFMPARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFMPARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFMNuevos con garantiaCaracteristicas:Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.This series requires no bagging because all waste dumps from the rotary air lock, and there is no n...