Identificador: 1099
Abierta
ID de articulo : # 1099 se ha agregado a su lista de deseos.
Descripción
PARTE: 12052 – LIJADORA QUICKWOOD ELITE PRO1100
Usada en muy buenas condiciones
Machine has been cleaned & checked.
240 Volt 3-Phase
Complete with dust hose & manifold
QUICKWOOD ELITE PRO 1100
* MAX WIDTH OF WORKPIECE...43"
* MAX HEIGHT OF WORKPIECE...3.9"
* MAX LENGTH OF WORKPIECE...INFINITE
* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)
* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN
* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN
* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)
* ACOUSTIC INSULATION...THIS SANDER IS EQUIPPED WITH TURBOFANS FOR HOLDING THE WORKPIECE BY MEANS OF A VACCUM AND ARE FITTED WITH CLOSED CELL FOAM SOUND DEAFENING PANELS ATTACHED TO THE BOTTOM PANELLING, IN ORDER TO REDUCE THE NOISE LEVEL.
YEAR 2006
PHASE 3 PHASE
VOLTAGE 220 VOLT
ESTIMATED DIMENSIONS 98" X 80" X 83"H
ESTIMATED WEIGHT 5,000 LBS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - ELCON
PARTE: 12310 -
SIERRA ESCUADRADORA VERTICAL - ELCON
USADA - MUY BUENAS
CONDICIONES
YMFG: 2005
Voltage: 230V 60Hz 3Ph
7-1/2 HP 4,200 RPM motor; 163" horizontal cutting
capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO
digital readout with 2 meters (78.75") magnetic band installed for
horizontal positioning of the saw head; rigid welded box steel frame with (4)
vertical cutting positions; round upper guide rail with concave bearings for
smooth operation; equipped...
AMXmachinery
SIERRA VERTICAL 64 X 120
PARTE # 2SS-H5 – SIERRA VERTICAL – MOTOR 3 ¼ - CAP. 64” ALTO X 120” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 64"CORTE HORIZONTAL: 120" SIN LIMITEESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 120"DATOS DE ENVIOPESO: 298 LBSDIMENSIONES: 120 X 11 X 83 PULGADAS
AMXmachinery
PARTE: 2NT-NTCS24L – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP
PARTE: 2NT-NTCS24L – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – IZQUIERDA – LEFTPARTE: 2NT-NTCS24R – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – DERECHA – RIGHT - OPCIONALNueva con garantía CARACTERISTICASCapacidad máxima de corte: 2" x 21", 4" x 19", 6" x 15", 8" x 8"15 HP motor, 3PH 230V with 24V magnetic controls24” Carbide tipped blade included1” Saw arbor diameterCycle operation: PneumaticQuick access on front of the machine to adjust blade stroke.Safety ...
AMXmachinery
COMPRESOR DE AIRE LUBRICADO - TANQUE 50 LT, 3 HP, 127 V, 1 FASE
PARTE: COMPRESOR DE AIRE LUBRICADO - TANQUE 50 LT, 3 HP,
127 V, 1 FASE
Nuevo con garantía
Potencia 3 HP
Tanque de 50L
Uso General
115 PSI de presión
Válvula reguladora de presión
2 salidas de aire con conectores rápidos
Transmisión directa de 3,400 rpm