Identificador: 1068
Abierta
ID de articulo : # 1068 se ha agregado a su lista de deseos.
Descripción
PARTE: 12107 – MOLDURADORA – 5 CABEZALES - SCM SUPERSET 23
Usada – Muy buenas condiciones
Maximum working width of finished workpiece 9”
Maximum workpiece thickness 4-3/4”
Feed speed 20 – 98 ft/min
Feed motor 5HP
Spindle diameter 1-13/16”
Speed of spindle 6,000 RPM
Min/Max diameter of profiling tools 100/200mm
Min/Max diameter of planer tools 120/140mm
Length of infeed table 78”
Dust hood diameter (Top horizontal) 6”
Dust hood diameter (All others) 5”
Shipping Footprint: 140 (length) x 86 (width) x 67 (height)
Weight:5500 lbs
Year of Manufacture: 1997
Condition: Very Good
Electric440 volt, 60 cycle, 3 phase
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE PANELES
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICAAn Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in ItalyAs compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets. Occupies about the same footprint as a sl...
AMXmachinery
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 36” ANCHO
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 1 LIJA - 36” ANCHO
Usada
Motor principal: 5 HP, conectada 440V, 3 fases
Motor avance: 1.5 HP, conectada 440V, 3 fases
AMXmachinery
PARTE: 2TA-SFJ-4500A - PRENSA ENSAMBLADORA FINGER JOINT - 181” LARGO
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINT - 181” LARGOFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard ...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROS
PARTE:
2PG-SC2 - HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROSNUEVO CON GARANTIAIdeal for Teachers“I have traveled with my SC-2 for 11 years. I sometimes have to use welding gloves to put the warm kiln on a cart, take it outside, load it in the car, and wrap it in a wool blanket.“I have traveled out of state with my SC-2 repeatedly. Fired it over and over again in class, burned up all manner of skewers, toothpicks, cork clay and more. The kiln can take it! While I'm sure the kiln wou...