Identificador: 1053
Abierta
ID de articulo : # 1053 se ha agregado a su lista de deseos.
Descripción
PARTE: 12094 – MESA INDEXADORA – EVANS MACHINERY
USADA – EN BUENAS CONDICIONES
Manual Hand-Crank for Width Adjustment
Board Guides
Pneumatic Lock for Width
Maximum Substrate Size: 62" x 145"
Minimum Substrate Size: 9" x 27"
Air Requirement: 80 PSI
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
GUILLOTINA DOBLE HOJA
PARTE # 11931 - GUILLOTINA DOBLE HOJA - MONGUZZIMod. TRM 2L 2.600Capacidad de corte 2.700 mm.Ancho máx de corte 520 mm.Ordenador de corte con 99 programasNormas CEAño 2001
-500x500.jpg)
AMXmachinery
LIJADORA DE BASTONES DOBLE
PARTE # SIL-DC-SD220 - LIJADORA DE BASTONES - 2 LIJASNueva con garantiaCapacidad de ½” a 2” de diámetroNueva con garantía 6 meses en partes mecánicasMotor de 5 HP, 220V, trifásicoVelocidad de las Bandas 5,000 pies/minVelocidad de avance: 15 - 18 mt/minTamaño de la lija 5” x 73”Tamano de la maquina: 29-1/2" x 33-1/2" x 53"Peso neto: 870 lbs, Peso bruto: 1120 lbsVideo Maquina Trabajando: VIDEO 1
-500x500.jpg)
AMXmachinery
LIJADORA DE BANDA ANCHA – 37” ANCHO – 2 BANDAS
PARTE: 2EX- XS-2E37 - LIJADORA DE BANDA ANCHA – 37”
ANCHO – 2 BANDAS
NUEVA CON GARANTIA
230/460 Volt
Factory Wired 230 Volt
The Excess
Series is unmatched in quality, performance, and value by any manufacturer, foreign or
domestic. The Excess Series provides heavy-duty construction, quality design
and engineering,
and an excessive number of features that we provide in every
machine.
And to top
it off all of our electrical controls, pneumatic controls, photo electrics,...
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...