Identificador: 1028
Abierta
ID de articulo : # 1028 se ha agregado a su lista de deseos.
Descripción
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA – 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HR
Standard Features
Cutter Head is Never Exposed
Table Moves w/Dual Air Rams Á Linear Bearings
Double Clamp System
Machine Specs
Dimensions
Length: 60"
Width: 90"
Height: 50"
Table Height: 37"
Power
20 HP Electric Motor: 208/230/480/3/60 TEFC
Completely pre-wired motor starter with start/stop buttons and circuit overload protection
Specifications
Arbor & Bearing Size: 2"
Approx. 2000 lbs
Table Linear Bearings Size: 1-1/4"
Clamp Linear Bearings Size: 1"
Hardened Linear Bearing Shafts
3/8" Thick Steel Table Top
3/8" Thick Steel Framing
8" Dust Ports: 5,000 CFM Recommended
Capacities
Material Width: up to 6"
Material Height: 4"(Standard)
Material Length: up to 60"(Standard)
Standard Notch: up to 9" wide
Adjustable Notch: up to 2-1/2" tall
Up to 800 Stringers Per Hour
Machine Specs
Air System
Operating Pressure: 100 PSI, 20 CFM
Air Cylinder Bore Size: 2"(x4 Cylinders)
Air System Includes: Dual Hand Safety Controls, Lockout Valve, Regulator, Pressure Relief, Reservior, Table Speed Controllers, & Mechanical Valves
Options
Machine Options
Cutter Teeth for Recycled Material
Longer & Taller Capacities
Different Notch Widths
Stand Alone Control Station
Stringer Stacking Racks
Caster Feet
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA 1 SIERRA 12"
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...
AMXmachinery
PARTE: 12556 - TRANSPORTADORES DE RODILLOS - HYTROL ABEZ
PARTE: 12556 - TRANSPORTADORES DE RODILLOS
- HYTROL ABEZ
USADO - MUY BUENAS CONDICIONES
2,000 pies lineales motorizados
500 pies de gravedad
500 gravedad rueda de patina
35 curvas
Están todos los motores, sensores y accesorios
18 mesas de transferencia
300 pies de banda ancha de las negras
AMXmachinery
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S & P
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S
& P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...