Identificador: 247
Abierta
Descripción
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALES
NUEVA CON GARANTIA
CARACTERISTICAS
220V/60HZ/3PH
1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP
2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP
3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP
4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HP
Feeding motor: 3Kw – 4 HP
Stepless variable feed speed 10-33m/min
Feed beam :0.75kW
Working width: 20-130mm
Working thickness: 8-100mm
Individual motor to each spindle to ensure maximum cutting(Standard)
Hard chrom treatment has been adopted for the durability of the work table surface(Standard)
Equip with short-piece gear box for the shortest length of 180mm
Lengthened-type side pressure roller at the infeed entrance for effectively prevent wood running deviation
Multi-section pneumatic adjustment is adopted to the conveying pressure system
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA CALIENTE DE VAPOR CON 9 PLATOS
PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS
1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8
ABERTURAS MARCA IND. G.H. CON DIMENSIONES DE 60” POR 108” ACCIONADA POR UNIDAD
HIDRAULICA, EQUIPADA CON MESA DE ALIMENTACION, MOTORES DE 2 A 7.5 HP ASI COMO
15, 30 Y 40 HP CON RELOJ DIGITAL PARA EL TIEMPO DE PRENSADO CON UN RANGO DE 1 A
30 MINUTOS, CON BOMBAS HIDRAULICAS EN EL INTERIOR DE DIFERENTES CAPACIDADES DE
5 A 20 HP.PLATES: 56" X 108"PRESSURE WHEN IN USE: 2300-2500 LBSTEMPERATUR...
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE # 2TA-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate ...
AMXmachinery
PARTE: 12082 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT R931
PARTE: 12082 – AFILADORA DE CUCHILLAS – WEINIG
RONDAMAT R931
USADA - BUENAS CONDICIONES
1.5 HP motor
with variable-speed
Will handle
heads up to 9-1/16”-long and 11-27/64”-diameter.
Includes
coolant pump and reclamation system.
Weinig’s best selling profile grinder will hold .000196 tolerances.
AMXmachinery
PARTE: 12108 – CABEZALES PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 60 MM LARGO
PARTE: 12108 – CABEZALES PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 60 MM LARGOUSADOS – EN BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA