Identificador: 1935
Abierta
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA INGLETEADORA DOBLE – OMGA
PARTE: 12104 – SIERRA INGLETEADORA DOBLE – OMGAUsada – Buenas condicionesYear: 1998Condition: Good220/380V, 60HzMotor: 3 HP MotorsBlade: 14"Cut: 0-45 DegreesPneumatically Activated Heads
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
RECIPROCANTE 43"
PARTE # 2TA-TS-HACDE – RECIPROCANTE – 43” ANCHONueva con garantiaAuto Clean Flat-Line Spray MachineTechnical data: (Each Set)A. Machine Size L6442 x W3700 x H2700mmB. Conveyer 1 lot- Loading Conveyer Belt & roller type- Spray Conveyer Belt type- Belt Cleaning Unit (for over spray cleaning)- Conveyer Speed 1~4M/min- Speed Control InverterC. Reciprocator 1 lot- Power 2KW- Speed 1~1.8M/sec.- Speed Control Servo Motor- Valuable Stroke 1100mmD. Spray Booth 1 lot- Size L2250 x W3700 x H2700mm- P...
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285