Identificador: 1336
Abierta
.png)
.jpeg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
Two Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CABECEADORA DE BASTONES
PARTE # 1N-BTC-010 - CABECEADORA DE BASTONES CON MOTOR INTEGRADOPara redondos de 1/2" a 2" diametro - Se pide el cabezal de medida exacta, cabezales de otras medidas son opcionalesCapacidad de 1/2"Cabezal Standard para bastón de 7/8”, montado en base de metal, con 2 navajasTiene motor integrado de 1/2 HP, 110/220Volts, 1 fase.Produce aproximadamente 20 piezas/min.Medidas maquina: 60 cm largo x 40 cm ancho x 120 cm altoPeso: 60 kgVideo de la maquina funcionando: VIDEO 1
AMXmachinery
PARTE: 12519 - ROUTER CNC - BIESSE ROVER 13
PARTE:
12519 - ROUTER
CNC - BIESSE ROVER 13
USADA - BUENAS CONDICIONES
INCLUYE PARTES EXTRAS CNC
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 96” ANCHO
PARTE: 2TA-SET-86TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 96” ANCHO
Nueva con garantiaThe automatic high-speed
through feed device allows for perfect finishing at speeds ranging from 12 ~ 52
FPM.
Suitable for mass
production of wood working factory for processing of double end cutting,
tenoning, grooving, moulding, and sanding.
It is a powerful machine
great for heavy-duty production.
In addition to the
double end cutting, all the settings and other processing can...
AMXmachinery
SIERRA CINTA 14"
PARTE # SIL-DC-SW1402 - SIERRA CINTA DE 14" - MOTOR 3/4 HPNUEVA CON GARANTIAMOTOR: 3/4 HP, 110/220V, 60 Hz, 1 FASEDISTANCIA DE CINTA A COLUMNA: 345 MMALTURA MAXIMA DE CORTE: 120 MMTAMANO DE LA MESA: 14" X 13-3/4"INCLINACION DE LA MESA: 0 - 45 GRADOSALTURA DE LA MESA: 42"LONGITUD DE LA SIERRA CINTA: 2350 MMANCHO DE LA SIERRA CINTA: DESDE 1/4" HASTA 1/2"PESO: 70 KGSEMPAQUE: 1 CAJA