Identificador: 1963
Abierta
Descripción
PARTE: 2CK-AZ - TRANSPORTADOR DE MATERIAL - MOTORIZADO
|
Belt Width |
BW |
12″ |
15.75″ |
19.7″ |
23.6″ |
27.5″ |
31.4″ |
|
Machine Width |
FW |
13.4″ |
17.3″ |
21.25″ |
25.2″ |
29″ |
33″ |
|
Std. Material Width (max.) |
PW |
9″ |
13″ |
17″ |
21″ |
24.8″ |
28.7″ |
|
Overall Machine Length |
L1+L2 + L3 |
79″-236″ (2000-6000mm) |
|||||
|
Body Material |
Heavy Steel Plate |
||||||
|
Speed |
Standard – Fixed 36 FPM or 16 FPM |
||||||
|
Optional – 3-15 FPM or 10-36 FPM |
|||||||
|
Characteristics of Track Belt |
Material Under Panel (steel plate), 2mm thick |
||||||
|
Transportation Capacity (Electric Motor) |
1/8HP or 1/4HP |
||||||
|
Power Source Wire |
Length: 16.5′ (5M) |
||||||
|
Electrics |
230/1/60 or 203/460 or 575/3/60 |
||||||
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 3 HP
PARTE: 2CK-PW120EIs designed for the most demanding sanding applications. With its powerful 3HP motor it can perform under industrial requirements. The oscillating belt ensures optimum sanding quality and extended belt life. Its versatility lies in the number of functions which can be done on this single machine. The industrial cast aluminum table can be easily tilted with positive stops of 45° and -5° so you can easily sand straight or miter edges. Additionally, the front table is spring ...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
DOBLADORA DE METAL
DOBLADORA DE METAL Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
Model
18
24
30
Maximum capacity,
mild steel
20 ga / 1,0
mm...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 12'6'' x 22
DOBLADORA DE METAL 12'6'' x 22 PARTE: 2GM-SBB1222Machine Tools 12-foot Siding Brakes are a portable, foldable solution designed for precision sheet metal bending in roofing and HVAC applications. Built with a heavy welded snap steel stand for stability, this tool ensures durability and reliability on any job site. Featuring a cut-off shear for clean, accurate cuts, it’s the ideal companion for roofers and HVAC professionals seeking efficiency and precision. ISO 9001 cer...