Identificador: 975
Abierta
Descripción
PARTE: 12138 – TORNO PARTES IRREGULARES AUTOMATICO
USADO – BUENAS CONDICIONES
4 pieces worked contemporaneously
max. diam. of work mm. 280
max. working length mm. 1250
cutters rpm 4.950
cutter motor power Hp 10 ( 7,5 Kw )
rotation speed of pieces rpm ( min.0 / max.100 )
feed speed mm./1 ( min.0 / max. 500 )
diam. of cutters mm. 210
pneumatic system pressure 6/10 bar
totally enclosed
total installed power Kw 10
connection voltage Volt. 380 / Hz 50
net weight kgs. 3350
overall dimension mm. 3450 x 1760 H=mm.2050
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96”
PARTE:
2DO-PMC-264-1 –
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP -
MESA 30”X 96”
Nueva con garantíaMaximum Part Length:Pressure Pad Traveling Bar: 96"Pressure Pad
Traveling Bar Contact Wheel Assembly: 80" Table
size: 30" wide X 96" long Steel
table covered with ¾" x 6" pine boardsTable
weight capacity: 200 lbOne
Abrasive Belt: 6" X 264", 4750 F.P.M.Pulleys:
10" dia. X 6.252 facePressure
Pad Traveling BarHand
Held Pressure DeviceVertical
adjustment: 28"...
AMXmachinery
PARTE: 12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
PARTE:
12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
Usada - En Buenas CondicionesEffective
Working Size: 98″ L x 55″ H x 27″ DeepMin.
Effective Working Size: 8″ L x 10″ HAutomatic/Manual
MotorizedAdjustment
of vertical and horizontal beams(2)
1.5 HP motorsJoy-stick
for manual movementClamp
timerCondition:
Cleaned/Checked
Electrical:
230V, 3PH
AMXmachinery
PARTE: AMX-10142 - ABANICO - 20” DIAMETRO - MOTOR 120V, 3.32 AMP
PARTE: AMX-10142 - ABANICO - 20” DIAMETRO - MOTOR 120V,
3.32 AMP
USADO - BUENAS CONDICIONES
20” DIAMETRO
9” FONDO
MOTOR: 120V, 60 HZ, 3.32 AMP
AMXmachinery
ESCOPLO OSCILANTE 2 MESAS
PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERYNueva con garantiaA faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.Two working tables built in both side of the machine to double the production for high efficiency mortising operation.Pneumatic hold down clamps and pneumatic depth movement for smooth finish.Fully automatic mortise produce cycles simply by stepping on the foot pedal.Hydraulic pistons for drillin...