Identificador: 741
Abierta
Descripción
PARTE # 11856 – TORNO DE DESENROLLO – CAPACIDAD 2700 MM LARGO
Marca: R.F.R.
Modelo: 16P26
Año: 1978
Condicion: usado
Hecho en Austria
Diametro Maximo de tronco: 1600 mm
Largo maximo de tronco: 2700 mm
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
PARTE:
AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO
AMXmachinery
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15”
DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 12” FONDO
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...