Identificador: 2571
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 20'' x 40'' PARTE: 2GM-GML-2060
Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HP
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | MT7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Metric threads |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DOBLADORA DE METAL 6' X 10 GA
DOBLADORA DE METAL 6' X 10 GA PARTE: 2GM-0610EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model...
AMXmachinery1
FORMADORA DE METAL
FORMADORA DE METAL PARTE: 2GM-GMC PL-18HEMA reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency.ISO 9001 certified4HP Heavy Duty AC main motor, 220V, 3 phaseHeavy welded all steel construction for maximum rigidityOne side forms Flattened Hem and Open HemOne side forms Teardrop Hem and Rope HemOne year warranty for part...
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS
PARTE: 2CK-C372Is perfect for any small to mid-sized shops looking to achieve outstanding results. Its robust construction is the best in its class and provides superior sanding results. The flexibility with quick change abrasive belts, allow for more applications in a shorter time frame, helping to assist and meet deadlines. Has a relatively small footprint providing greater access for smaller shops to accomplish bigger results. Equipped with motorized thickness adjustment with digital inpu...
AMXmachinery1
SIERRA DE VAIVEN - 200 MM
PARTE: 2CK-FR-200 - SIERRA DE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
200 mm
Min.
Working Thickness
...