Identificador: 1725
Abierta
.png)
Descripción
PARTE: 2CK-BM-301
- Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.
- Come with adjustable two spindle drill head.
- Pneumatic work clamp to firmly hold workpieces.
- Machine operation activated by shrouded foot pedal.
- Cast iron work table with miter gauge for angled holes.
- Screw rise and fall adjustment of work table for varying timber thicknesses.
- Enclosed sheet steel floor stand supporting the machine.
|
Table size |
400 x 250mm |
|
Motor |
2HP (230/3/60) |
|
Spindle speed |
3450 RPM |
|
Thread |
M8 x 1.25P or M10 x 1.5P |
|
Maximum stroke |
100mm |
|
Machine weight |
120 kgs. |
|
Voltage |
230/3/60 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 3/16''
DOBLADORA DE METAL 4' X 3/16'' PARTE: 2GM-04316EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is power...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 8'6'' x 22
DOBLADORA DE METAL 8'6'' x 22 PARTE: 2CK-SBB822Machine Tools 8-foot Siding Brakes are a portable, foldable solution designed for precision sheet metal bending in roofing and HVAC applications. Built with a heavy welded snap steel stand for stability, this tool ensures durability and reliability on any job site. Featuring a cut-off shear for clean, accurate cuts, it’s the ideal companion for roofers and HVAC professionals seeking efficiency and precision. ISO 900...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...