ID: 1248
Open
Description
PARTE # RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4 HP Spindle Drive Motor, TEFC
60″ Back Fence Assembly
(1) 13-Vertical Gear Driven Spindle Rows
10mm Bored Collets
(7) Right Hand, (6) Left Hand
(2) Index Pins
20″ X 48″ Work Table Surface
Wired 1-Phase 120 Volt, 60 Hz.
Manually Actuated Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 44″ and 508 Lbs
Designed and Manufactured in the USA
The starting point for our line boring machines, this unit is both affordable and built to last. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - HOLZHER 1265
PARTE: 12311 -
SIERRA ESCUADRADORA VERTICAL - HOLZHER 1265
USADA - MUY BUENAS
CONDICIONESSupercut
with scoring; 75" X 169" capacity; 4 HP main motor; 1-7/8"
maximum depth of cut; 220 mm diameter saw blade; saw head rotates 90° for rip
and crosscutting; manual moving back grid via hand lever; (2) length stops;
optional lower stop rail; hinged mid support rail; bottom rollers for easy
movement of large panels; self-contained dust collection
AMXmachinery
MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9”
ANCHO – WEINIG
USADA – BUENAS CONDICIONES
– LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP
shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle)
pneumatic up/down
Central adjustment of top spindle chipbreaker ...
AMXmachinery
PARTE: 12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
PARTE:
12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
Usada - Buenas CondicionesMain motor: 25HP, 220V/440V*
(prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump -
Main Saw Motor - 25HPMaximum cutting capacity:
10" x 16"Distance from blade to
conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x
1" WSaw blade speed: 7300 FPMFloor to table height:
40"Infeed table: 106" L x
16" WInfeed belt: 2...