Identificador: 89
Abierta
Descripción
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050
T-Edge Applicator
- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.
- Standard Features:
- Hammer ½ hp motor
- Pneumatic corner notching
- Electric cutoff ½ hp motor
- 3" Dim. Saw blade 8,000 RPM
- 80 PSI Required
- Crated weight 600 LBS.
- Shipping dimensions 53” long X 40” wide X 50” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 254 LITROS
PARTE:
2PG-DRAGON24 – HORNO PARA CERAMICA, VIDRIO, METALES – 254
LITROSNuevo con garantíaMax. Temperatura: 1287 grados centígrados16500 Watts, 69 Amps
Medidas interiores: 610 mm ancho x 610 mm fondo x 686 mm
altoPotters who struggle with top-loading kilns will enjoy the Dragon. The door
swings open 160 degrees on a heavy ¾” steel rod with sealed bearings. Two
spring-loaded latches press the door tightly closed.Quick to
loadIf you
fire ware that is similar in size from ...
AMXmachinery
PARTE: 2PR-100 - COLECTOR DE ASERRIN - MODULAR - MOTOR 10 HP
PARTE: 2PR-100 -
COLECTOR DE ASERRIN - MODULAR - MOTOR 10 HP
Nuevo con Garantía
Size: 90 cm ancho x 275 cm largo x
275 cm alto
Filtros: 18 filtros en total 19.33 m²
Hardware:
~ Reverse incline material handling impeller
~ 10 gauge construction
~ Pneumatic vibrational pack
~ 10 HP Siemens Cast Iron Motor
~ 10” Diameter Filters
~ Interior baffle to assist in even filling
Specs:
~ 5000cfm @ 6” Static
Pressure with 15” duct (This is th...
AMXmachinery
PARTE: 12210 - MOLDURADORA – 6 CABEZALES – WADKIN K23
PARTE: 12210 - MOLDURADORA – 6 CABEZALES – WADKIN K23
USADA – MUY BUENAS CONDICIONES
440V, 3 FASES, 60 HZ
MFG: 2009POCAS HORAS DE USO