ID: 266
Open
Description
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
PARTE:
AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO
AMXmachinery
MOLDURADORA – 5 CABEZALES - WEINIG PROFIMAT
PARTE: 12163 - MOLDURADORA – 5 CABEZALES - WEINIG
PROFIMAT
USADA – MUY BUENAS CONDICIONES
Spindle diameter
1-1/2″
5-head (B-R-L-T-B)
working capacity 9-1/16″ x 4-11/16″
Spindle sequence:
Bottom 10HP, Right/left 15HP, Top 15HP, and Bottom 10HP
Mechanical digital
readouts
Variable speed 20-78
FPM
Powered by 4 HP
motor
Full sound enclosure
Receding chip maker
and pressure element at top spindle, in feed straightening table
AMXmachinery
CEPILLO 1 CARA - POWERMATIC - ANCHO 16”
PARTE:
12364 - CEPILLO 1 CARA - POWERMATIC - ANCHO 16”
USADO - BUENAS CONDICIONESMain motor 5 HP 220/440VCapacity 6” x 16”Cutterhead straight 4 knife
Painted and shop test runMotor is heavy frame
equivalent to at least a current 7.5 HP motor
AMXmachinery
CABEZAL PARA LIJAR
CABEZAL PULIDOR PARA MOLDURAS Y PARTES IRREGULARESCABEZAL PULIDOR STANDARD CON 32 CEPILLOS CORTOS DE 1-1/2" (13-1/4" DIA)OPCIONAL:CEPILLOS LARGOS DE 3-1/2" (17-1/4" DIA)LIJA GRANO 60, 80, 100 O MAS FINA4 TAMANOS A ESCOGER:MODELOANCHOFLECHA2GP-W-10011”¾ - 1-1/2”2GP-W-10022”¾ - 1-1/2”2GP-W-10044”¾ - 1-1/2”2GP-W-10066”¾ - 1-1/2”