Identificador: 266
Abierta
Descripción
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CONVERTIDORES DE FASES - DE 220V 2 FASES A 220V 3 FASES
PARTE: 2PH-GPPL - CONVERTIDORES DE
FASES - DE 220V 2 FASES A 220V 3 FASES
NUEVOS CON GARANTIA
Rated
for any environment, indoor/outdoor.
Designed
to work for voltage-sensitive equipment.
INPUT:
208-250V - 50/60 hz Single Phase
OUTPUT
208-250V - 50/60 hz Three Phase
Includes
Start and Stop with a built-in contactor, and a Voltage Meter Display
TAMANOS:2
HP
3
HP
5
HP
7.5
HP
10
HP
15
HP
20
HP
30
HP
40
HP
50
HP
60
HP
75
HP
10...
AMXmachinery
SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
PART:
12327-E - SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
USED
- EXCELLENT CONDITIONS
230/460V,
3 PHASE
AMXmachinery
PART: 1AM-1180-EG – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTOR
PART: 1AM-1180-EG – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTORNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyGasoline motor 13 HP
Maximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/533846659 - Electric MotorVideo: https://vimeo.com/533846659 - ...
AMXmachinery
LIJADORA BANDA ANCHA – 37” ANCHO – 2 LIJAS – TIMESAVERS
PARTE: 12239 – LIJADORA BANDA ANCHA
– 37” ANCHO – 2 LIJAS – TIMESAVERS
USADA – BUENAS CONDICIONES
Electric 208/230
volt, 60 cycle, 3 phase
Hours
on meter: NA
Timesavers
2300 series
37"
wide sander with 2 sanding heads
25hp
and 20hp sanding head motors
8"
diameter rubber contact drum on first head
2nd
head is combination drum and polishing platen
37"
x 75" sanding belt size
Variable
feed speed 15 - 45 fpm
2
load meters (1 per sanding head)
...