ID: 1142
Open
Description
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA OPTIMIZADORA
PARTE # 2OM-T2010NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2020NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2030NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONNUEVA CON GARANTIACaracteristicas:Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal.Particularly suitable for medium production requirements.The maximum feed speed of 400 FPM makes of the T 2010 NC a compact, flexible and highly productive system.The set of 5 top pre...
AMXmachinery
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
USADO - BUENAS CONDICIONES
MOTOR 7.5 HP, 208-230/460V, 3
FASES, 3450 RPM, BALDOR
ENTRADA REDONDA: 8.5”
SALIDA RECTANGULAR: 4” X 8”
MEDIDAS TOTALES: 23” ANCHO X 21”
FONDO X 21” ALTO
AMXmachinery
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachinery
CORTADORA ESQUINAS
PARTE: 2AC-CM60 - CORTADORA ESQUINAS- PARA METAL Y PLASTICOLa cortadora esta diseñada para cortar plasticos flexibles hasta .350” y aluminio hasta .063” y otros materiales de peso intermedio.Tamaño: 10" Largo x 6.5" ancho x 9” alto, Peso 7.5 libras (Con Unidad de Corte). Unidades de Corte Disponibles:1/2", 3/4", 1" ·Round - 1/2", 3/4", 1" ·Slot - 1/4" x 1/2" (para aluminio .040 y plastico .063”) Capacidad de Corte: ·Aluminio….................................