Identificador: 1142
Abierta
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACT - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
NUEVA CON GARANTIA• 5’5” x 10’2” cut capacity; 2-3/8” (60mm) cut depth• 5-1/4hp, 3-ph high-efficiency motor w/ electro-mechanical brake• One-piece full-length centershelf with moveable aluminum fingers• Integral full-length wood support area for small part support• Specially designed measuring stop for use w small partsFlexible and EconomicalThe STRIEBIG COMPACT is the entry leve...
AMXmachinery
ESTUFA/SECANTE PARA MADERA AMERICAN WOOD DRYERS
PARTE # 10303 - ESTUFA/SECANTE PARA MADERA - AMERICAN WOOD DRYERSSON 2 CAMARAS JUNTAS1 CAMARA DE 43,200 PIES TABLA1 CAMARA DE 38,400 PIES TABLAAMBAS ESTAN DESARMADASSE COMPRARON FUNCIONANDO EN ESTADOS UNIDOS Y NUNCA SE INSTALARONNO INCLUYE LA CALDERATENEMOS 27 PLANOS EN PDF PARA FACILITAR EL ARMADO
AMXmachinery
EXTRACTOR AXIAL DE PARED - DE 6 ASPAS - 36” DIAMETRO - AMERICAN COOLAIR
PARTE: AMX-10090 - EXTRACTOR AXIAL DE PARED - DE 6
ASPAS - 36” DIAMETRO - AMERICAN COOLAIRUSADO - EXCELENTES CONDICIONES - COMO NUEVOPOLEA Y BANDAVENTILADOR
MOTOR CERRADO DE 1 HP, 220/440V, 3
FASES, 1,750 RPMMEDIDAS TOTALES: 16" ANCHO X 44" LARGO X 44" ALTO
-500x500.jpeg)
AMXmachinery
GATO PARA TARIMAS 3 TONS - MB
PARTE # 1CM-PH-ST - PATIN HIDRAULICO ESTANDAR - 3 TONS - MBCaracterísticas:- Ancho horquillas: 27” (685mm)- Largo de horquillas: 48” (1200mm)- Ruedas: Tipo Tándem (Nylamid)- Capacidad: 3000 kgs (3 tons)- Procedencia: Americana Marca: NEWLIFT (USA)- Palanca: De posiciones- Peso patin: 90 Kg (aprox.)- Altura max: 203 mm (8”)- Altura min: 85 mm (3.3”)- Pintura: Esmalte Alta resistencia- Sistema Hidr: Partes intercambiables sin sellar- Garantía: 6 meses contra defectos de fabricación